the beast

[Brandon15]

please help I cant get my axle nut to break loose ,any helpful hints would b thankful P.S its a 1984 250r and iam restoring it. THANX

[MickeyC]

I am sure you will hear this a bunch, but here goes.... Penetrating oil, like kroil or pb blaster. Try putting some heat to it. And use a decent breaker bar or maybe an impact, if you are talking about the front axle nut? Or try a cheater bar if its the rear axle nuts?

[CrazyPollock]

.... I think i'll put some anti-seize on mine when it goes back together >_<

[Brandon15]

thanx ,but i have tried all but heat and i guess thats all i have to try next i will keep my fingers crossed

[coolpool]

If you don't have a decent impact gun, take it to a local garage with some coffees in your hand and I'm sure they'll give it a shot for you for nothing. It's worth a shot anyway.

[thestud25]

Do not strip it out if you do not have adequate tools. Do like Coolpool said and take it down to the shop.