PDA

View Full Version : Rims question


BiGDawG
03-14-2012, 02:35 PM
will rims off a 85 200x fit on a 85 110? if not what rims will fit the 110? not sure if i wanna mess with the 2 piece rims and i have an extra set of rims/ tires off a 200x
jb2wheels
03-14-2012, 03:11 PM
No. 200x bolt pattern = 4x110, ATC110 bolt pattern = 4x130. However, the 200x hubs will slip right on the 110 axle. Use the 200x hubs and wheels and you're good to go. Or even TRX 250/400/450 hubs. They fit too and have 4x110 bolt pattern and give you about 3" wider track.
BiGDawG
03-15-2012, 04:02 AM
alright thanks, i'll have to look into getting some hubs then
KASEY
03-15-2012, 09:33 AM
Or even TRX 250/400/450 hubs. They fit too and have 4x110 bolt pattern and give you about 3" wider track.

this is NOT TRUE!!!! ITS LESS THAN 2 INCHES TOTAL,,, about .75 inches per side ,,, here is a pict of the difference between them,, 200x and 450r ..

http://i1141.photobucket.com/albums/n592/KASEYII/DSC00334.jpg
aldochina
03-15-2012, 09:53 AM
isnt the spline count different on the 300ex/400ex/450r than the 200x/350x/250r???
jb2wheels
03-15-2012, 05:43 PM
Thanks Kasey - I thought mixed up 1.5 total with 1.5 per side per side for some reason. I must be losing my mind.

Splines change for 86+ 200x, all 350x, and 85+ 250R. Just about all the other Hondas interchange. You can put 1st gen 200x hubs on a 70 if you want.
BiGDawG
03-18-2012, 02:02 AM
got me a set of 200x hubs for $25, now to install them do i just take the big nut off? never done it before but if its that easy think i'll have some painting to do this summer on mine but u cant see my hubs threw the spacers
DRKCYDE
03-18-2012, 08:04 AM
got me a set of 200x hubs for $25, now to install them do i just take the big nut off? never done it before but if its that easy think i'll have some painting to do this summer on mine but u cant see my hubs threw the spacers
Yes, remove cotter pin, and remove big nut. Good to go.
As previously mentioned, have a set of 18's from the 200x that I like to use on the 70.
BiGDawG
03-18-2012, 10:19 PM
i'm gonna have to get a cotter pin the 1 side i had to fight with for a half hr other side was easy, yea that's what i got some 18's on 200x rims just need a front tire

http://i155.photobucket.com/albums/s282/MARK2153/th_DSC02010.jpg (http://s155.photobucket.com/albums/s282/MARK2153/?action=view&current=DSC02010.jpg)http://i155.photobucket.com/albums/s282/MARK2153/th_DSC02011.jpg (http://s155.photobucket.com/albums/s282/MARK2153/?action=view&current=DSC02011.jpg)http://i155.photobucket.com/albums/s282/MARK2153/th_DSC02014.jpg (http://s155.photobucket.com/albums/s282/MARK2153/?action=view&current=DSC02014.jpg)