Who is making the reproduction stickers???

[roofinggun]

I keep seeing those reproduction stickers on Ebay, Who is making them? I would like to get those triangular ones for the 350X fenders.

[Factory fx]

go to the link page on the main site and there is a website that has alot of trike stickers.

[roofinggun]

Does anyone have the stickers that they have not installed yet? If I had a color copy of them I think the company in MN can make them.

[350x'inNY]

I do not know anyone that has BOTH the chain slack and tire pressure stickers. I took a very close dig pic of my chain slack one and know where I can get the tire pressure one and just haven't had time to 'cut and paste' the two together and send to a guy I know that's been making the gas tank warning stickers and others for a 350X. He's biting at the bit to get those and I'm going to scan the rear mud flap sticker of my plastics.

Bruce

[Jez]

Speak to Mike at www.vintagemotorsports.net. He's got the 350X tire info decal in stock for US$25. He's also got a load of other stuff too (have a look around the site) and offers a really fast and friendly service. Those decals are by no means cheap, but then they never were when you could get them through the Honda dealers!

The link to the decals page is as follows:

http://www.vintagemotorsports.net/decals.htm

Let us know how you get on.

Cheers,
Jez

[dividebyzero]

His name is Harlan Lsyne out of Fergus Falls,MN.I don't know his username but he did have some posts on here about the stickers.I sent him an outlined drawing of one side sticker(350x)and pics(thanks tom batts!)to him.He's working on them as we speak.

[roofinggun]

Hey 452x,

Thats who I have been talking to. Harlan makes reproductions of the tank wings, top decals on the tank, and the front and back fender 350x. He was looking for the triangular stickers, but can't find them. No one has them that would be willing to get a color copy??

[Jez]

Seriously, take a look at vintagemotorsports on the link below:

http://www.vintagemotorsports.net/decals.htm

[roofinggun]

Vintage has the tire decal info, but I would still be short the other decal which I think is the chain.

[jeswinehart]

i too really want a set of decals for my maire 350x fenders,,, the side ones. i'd check into having a set digitized and was gonna be about 125 for like 10 sets. i just had a problem with cutting them off the old fenders i'd replaced. they where just dull looking and had one small crack. i ended up giving them to a friend here in hometown cuz his old one where really screwed up.
i sent harlen a e-mail this morning to see if he wanted a set of side decals for a 200x ( 83-85) to copy off of. that was the only good thing on those rear fenders so i cut them out before scrapping the rest.
haven't heard back from him as of yet but maybe he will be able to offer you 200x guys some decals.

[dividebyzero]

Harlan needed an outline of one of the stickers so he could make them the right size(side stickers),which i sent him.I sent him pics of both sides so he knows what to put on them.They will be done,just don't know when.