Project 185s High Performance ATC Full Suspension

[shortline10]

Still gathering parts but this one will be a fun build !!!!! :w00t:
Old school early 1980's High performance atc frame , aftermarket HD axle lots more !!!!!

[3wheelrider]

Been waitin to see that frame-never seen one. That looks killer man.....I know its a pccc front but did hi-perf. make a front also? just wondering. Cant wait to see the end result. I'm jealous.
........Wish I could pay you to restore my "Warlock" 185s. lol

[3wheelrider]

Is the motor still M.I.A?

[ametzker]

HI- performance did make a front end also. Here is a pic of my 185 with it.

http://i827.photobucket.com/albums/zz194/johnbrakingground/185%20S/ATC185006.jpg

http://i827.photobucket.com/albums/zz194/johnbrakingground/185%20S/ATC185005.jpg

Here it is finished. Suspension 185 also. But I know yours will be super bad ass.

http://i827.photobucket.com/albums/zz194/johnbrakingground/185%20S/Abbies185after004.jpg

http://i827.photobucket.com/albums/zz194/johnbrakingground/185%20S/Abbies185after007.jpg

[3wheelrider]

-Oh neat-Looks like theyre pretty similar to the PCCC except for the tabs for the light brackets...Nice 1 of a kind lookin 185s. What are the before & after shocks from? & what diam. are they?
Sadly I cant do mine the justice it deserves- gonna be poor man restore.lol.

[ametzker]

Sorry not trying to hijack the thread but the forks after are off of an 85 YZ80 and are 31mm if I remember correctly. I will be watching this thread closely. THis will be an awesome build for sure. :naughty:

[hippyplz]

I have a set of those tree's also but mine are set up for 34mm forks.

[jsmay]

hey mike! thats great, looks to be yet another killer trike in your line up...

[Vealmonkey]

Those are NOT PCCC front forks. PCCC front forks are cast. I'm glad to see that frame went to a good home. I'm anxious to see how this turns out. It just bothers me I leave town to go ice racing and shortline sneaks a project in on me! LOL

[Yamaha_Rules69]

Shortline, what kind of shock is that on the rear? Is it an air shock, and is it era correct, or is it something new?

[shortline10]

The tripples are made by High performance also , very similar to Big Al's tripples .



Been waitin to see that frame-never seen one. That looks killer man.....I know its a pccc front but did hi-perf. make a front also? just wondering. Cant wait to see the end result. I'm jealous.
........Wish I could pay you to restore my "Warlock" 185s. lol

[shortline10]

The rear shock isn't correct its just a early Harley air shock I had lying around for a mock up .
Need to shop around for a decent shock still .

Anyone know the spacing for a 81/82 250r rear shock ? I need somwere around 12"-13" eye to eye .





Shortline, what kind of shock is that on the rear? Is it an air shock, and is it era correct, or is it something new?

[jsmay]

what did you use to paint the frame?

[shortline10]

Frame, triples and bearing carrier are powder coated .



what did you use to paint the frame?

[jsmay]

nice! what you gonna do to the motor? you planning on using the 185 motor or some crazy motor sway...2 stroke maybe?

[shortline10]

Gonna do it up old school correct with a 185s motor all tricked out . Still looking for a decent motor !!!!



nice! what you gonna do to the motor? you planning on using the 185 motor or some crazy motor sway...2 stroke maybe?

[riverrat]

I have a motor. It was owned by my friend and he said it was a strong running motor, I have no reason not to believe him. I was saving it for an auto x project. I'll take some pics if you are interested.

[90crazy]

This will be an inspiration to start building the Curtis Sparks Nicholson project!

[jsmay]

i was half expecting shortline to pull a xr500 outta thin air!:lol:

[rdlsz24]

Looks like a cool project. I am jealous of your bright green grass also.

Rob

[shortline10]

Yes post a pic here if you want . Thanks !!!!



I have a motor. It was owned by my friend and he said it was a strong running motor, I have no reason not to believe him. I was saving it for an auto x project. I'll take some pics if you are interested.

[shortline10]

Yes get it going !!!!!



This will be an inspiration to start building the Curtis Sparks Nicholson project!

[shortline10]

Its allot of work keeping it green this time of year . Another 6 weeks or so and i'll be mowing it every week :lol:



Looks like a cool project. I am jealous of your bright green grass also.

Rob

[jsmay]

Its allot of work keeping it green this time of year . Another 6 weeks or so and i'll be mowing it every week :lol:

don't rub it in... we go from summer to winter to mud... then summer again. horrible span of a month or so of just wet snow/rain and mud. i wish i could get the hell outta upstate ny! oh well, keep us posted on the build. I'm looking at a nicholson atc 90 frame.. oh and a few sets of turbo's!

[jsmay]

here ya go......

[shortline10]

Lots more done !!! I have all the motor mounts and bolts all sorted out , installed the seat latch and grab bar , painted the recoil and a better stator and flywheel and also installed a BAPP case saver !!!

[shortline10]

Parts are comming in !!!

[Vealmonkey]

What? No Fiberglass? This is a hot looking trike. Get that recoil starter refinished. Did you ever settle on a front end yet? Please side wide tire 250r. Doh, I keep forgetting you have the Hi Performance triples. What forks are in those triples? I have the Hi Performance triples on my RD350 frame. The thing is, I keep looking at the pictures of Curtiss Sparks and Tommy Gaian on the Nicholson frames with the 250r front ends and I can't get them out of my mind. I like my women like I like my trikes, wide in the front and soft in the back!!!

[shortline10]

I did some really hard looking for fiberglass and couldn't find any so Maier it is for now .
The triples that came with the frame are odd because their at 30mm but I guess I could cram a 31mm fork in their but I might just splurge and use a set of nos big Al's forks that are 33mm , they even have the chrome lower fender brackets so its very tempting .




What? No Fiberglass? This is a hot looking trike. Get that recoil starter refinished. Did you ever settle on a front end yet? Please side wide tire 250r. Doh, I keep forgetting you have the Hi Performance triples. What forks are in those triples? I have the Hi Performance triples on my RD350 frame. The thing is, I keep looking at the pictures of Curtiss Sparks and Tommy Gaian on the Nicholson frames with the 250r front ends and I can't get them out of my mind. I like my women like I like my trikes, wide in the front and soft in the back!!!

[Vealmonkey]

I just got in a 2nd set of fiberglass rear fenders. The first set I have looks like they are pulled off a set of factory fenders, but these fenders look a little different. I don't know if someone would want to mold and repop them or not.

[whitetail hunter]

any more progress on the 185s. there is a guy on ebay sells repop fiberglass fenders front and rear for 150.00 good quality. your build looks great.

[shortline10]

Yes I know Josh sells the fiberglass repo's but nothing for the rear of a 185s .
I did do a few little things to the bike but customers bikes are first and taking up all my time .
Prob going to play with intake manifolds today and maybe get the front tripples sorted .
Will take a few pics this afternoon !!!!!









any more progress on the 185s. there is a guy on ebay sells repop fiberglass fenders front and rear for 150.00 good quality. your build looks great.

[Vealmonkey]

143041143039143040I just got in a set of fiberglass fenders that should be copied.

[shortline10]

Got the aftermarket 200x intake manifold mocked up and it fits better than I expected and a new Sudco mikuni will make it breathe shens

[oscarmayer]

hey short, one of these days i've love to come by and hang out for a coupel of days jsut watchign and seeing how you do stuff. This way the minor details i miss form doing a restore will be filled in. I eventually want to do a compelte restore on one of my trikes.

[shortline10]

Sure thing bud come on down !!!!


hey short, one of these days i've love to come by and hang out for a coupel of days jsut watchign and seeing how you do stuff. This way the minor details i miss form doing a restore will be filled in. I eventually want to do a compelte restore on one of my trikes.

[shortline10]

Tripples installed :D

[torque]

this is going to be one nasty 185.

the detail you put into your builds is fantastic

[RodKnockRacing]

Looks Awesome Mike

[shortline10]

Few more parts came in !!! Supertrapp muffler , Couple different shocks , the one installed is a 81/82 250r rear shock and it looks great and I also picked up a fox rear shock but it needs some restoration .

[dirtjunkie85]

Sweet lookin blue rig you got there! time time time equals cool stuff!!

[shortline10]

Not much going on with this build but I did find a few seconds to install the filter :lol:

[yaegerb]

Looks great Mike!

[shortline10]

Found some time over the weekend to install the rear end !!!!

[jsmay]

looking great! cant wait to see a video of that thing tearin up the grass!

[shortline10]

Another couple weeks !!!! Got some more parts in as well .........




looking great! cant wait to see a video of that thing tearin up the grass!

[u.p ted]

where did u get your air filter from ?

[u.p ted]

and what size is it ? im looking 4 one to put on my 200x

[shortline10]

Its just a universal K&N R-1100 . here is a good deal on one
http://www.ebay.com/itm/200711677718




and what size is it ? im looking 4 one to put on my 200x

[shortline10]

A little more progress every week ....
Installed the pegs , gear shifter , foot brake pedal , and chain .
Still trying to figure out the rear brake cable , stock is to short .
Had to cut the lower foot peg bracket off a stock 185s frame and it bolted up perfect !!!!

[barrett8]

an 81 atc 250r rear break cable might be longer? and nice build it looks amazing

[shortline10]

Yes I believe your correct but their discontinued and I cant find an aftermarket company that makes them anymore .



an 81 atc 250r rear break cable might be longer? and nice build it looks amazing

[RapidRick]

I've started to making my own cables. Shortline, I"ll look and see if I've got one in good shape if you're interested.

[shortline10]

I will let you know Rick thanks for the offer . Bill 007 said he has some NOS cables and is pretty confidant that he has one for me .




I've started to making my own cables. Shortline, I"ll look and see if I've got one in good shape if you're interested.

[KASEY]

i have new cables too,, and i think in 3 different lengths too... just put one on my 185 build.

[shortline10]

Do you know which lenghts were for which models ?



i have new cables too,, and i think in 3 different lengths too... just put one on my 185 build.

[KASEY]

sorry i do not.. i can measure them.. from shortest to longest is about 1.5 inches total . with the PJ swingarm it took the longest one.. i can measure it tomorrow when i get to the shop,

[atc007]

Ok,Mike,I did not find the cables I was looking for. I found all the Yamaha,Suzuki,Kawi cables. Hondas live on their own! lol,So,I measured a 83 ATC 200 sitting here..24-25 inches long! I knew there were 3 different lengths. I can call a distributor Wednesday,1st day I'll be home : ( And have them measure and drop ship if we have too. And I own them if I can find them. My son and his friend helped me move stuff! That doesn't work too good!

[zeeker1]

http://i238.photobucket.com/albums/ff21/zeeker32/1982%20Honda%20185S/scan0002.jpg

Hey Mike, when I bought the PK kit for this it came with a pair of four inch longer cables. Note print. When I was cleaning this up I thought maybe I would need new ones so I emailed Barnett and asked if they would still make them. They said "sure, just send cash"...........or something like that. Well, I didn't need them so I can't say just how much cash they needed. Just saying!

http://i238.photobucket.com/albums/ff21/zeeker32/1982%20Honda%20185S/Honda009.jpg

[shortline10]

Thanks for the pics Zeek !!!! So your pics shows a atc 185 at 17" and that would work fine for me .



http://i238.photobucket.com/albums/ff21/zeeker32/1982%20Honda%20185S/scan0002.jpg

Hey Mike, when I bought the PK kit for this it came with a pair of four inch longer cables. Note print. When I was cleaning this up I thought maybe I would need new ones so I emailed Barnett and asked if they would still make them. They said "sure, just send cash"...........or something like that. Well, I didn't need them so I can't say just how much cash they needed. Just saying!

http://i238.photobucket.com/albums/ff21/zeeker32/1982%20Honda%20185S/Honda009.jpg

[atc007]

Won't be on here long. I was measuring clevis pin to end of adjuster . Total length.

[zeeker1]

Were you not going to use the hand brake? I think I have the print for that one too if you want it......zeeker

[shortline10]

No hand brake for now . I ordered a rear foot brake cable so lets see if I got the correct one :lol:


Were you not going to use the hand brake? I think I have the print for that one too if you want it......zeeker

[shortline10]

Got one on order Bill . Thanks for the help !!!


Won't be on here long. I was measuring clevis pin to end of adjuster . Total length.

[atc007]

No problem! I'm off to the hospital,just wanted to check in before I went.

[shortline10]

Hope all goes well Bill !!!!

Cable should come in this afternoon so we shall see .


No problem! I'm off to the hospital,just wanted to check in before I went.

[shortline10]

New cable arrived and its 2" longer than a 185s , basically the large framed utility bikes like the plain 185/200/200e are the 17" longer cable !!!!
Thanks all for the help :beer

[whitetail hunter]

any more progress mike?

[shortline10]

Nothing done since my last post but I did get all the parts in for the front brakes .



any more progress mike?

[250x]

The rear shock isn't correct its just a early Harley air shock I had lying around for a mock up .
Need to shop around for a decent shock still .

Anyone know the spacing for a 81/82 250r rear shock ? I need somwere around 12"-13" eye to eye .

Mike I have a 1st gen one I'd donate if you need one. Just let me know.

[shortline10]

Thanks Wayne for the offer . I have a real nice stock 1st gen 250r shock in it now . I might be in the market for an aftermarket one if you know of one for sale ?




Mike I have a 1st gen one I'd donate if you need one. Just let me know.

[atc300r]

I went on Motion -Pro website .They listed rear barke cables for the 185-200 ect. But nothing listed for the 81 250r.And they said on there you could order custom brake cables.That is one sweet wheeler. Im think about trying to do a 185s with pro-link and 200x frontend.

[shortline10]

Decided to work on my own crap today :lol: Customers bikes can wait :D .
Mocked up the NOS Big Al's front end . Not sure if I want to use the lower front fender brackets or not .

[shortline10]

Found the correct clamp mount for the supertrapp as well .

[jsmay]

A bolt on suspension 185s followed me home recently... Been super busy on the road these days but plan to freshen it up soon. Hope mine turns out half as cool as your!! Any updates on the 200x's.... I'm stashing parts away for that too. I think my 200x will be a dedicated ice machine and the 185s my trail bike. Too bad your soo far south, I'd love to check out your shop and drool over the trikes!

[zeeker1]

Hey Mike, where did you come up with that bracketry to hold on the front brake? I think this method is a bit simpler. Just me! Also, is that the front wheel and tire you plan on using?

146052

[Vealmonkey]

Zeeker, I have one of those brackets you can copy if you need to. You may have to redrill the bolt holes for the fork tubes as a lot of the fork tubes, the mounting holes are just slightly different.

[shortline10]

Its the brake stay bracket that comes with the Big Al's kit . I have a bracket like yours as well . Yes this is the front tire / wheel I will be using . Fork tubes seem a little long so I might need to slide them up a little .



Hey Mike, where did you come up with that bracketry to hold on the front brake? I think this method is a bit simpler. Just me! Also, is that the front wheel and tire you plan on using?

146052

[RodKnockRacing]

Looks amazing Mike

[shortline10]

Thanks bud . Got a few more parts in . Need to mount up the rear tires and get the front end bolted up !!!!




Looks amazing Mike

[shortline10]

Its a roller !!!

[userj8670]

looking great!!!!

[captainweezy]

Wow man freaggin beautiful.

[KASEY]

man that looks very nice!!!!

[Blown 331]

Awesome. I love suspended 185s. I need to put mine together.

[Keith Salyer]

I remember when Curtis Sparks was winning on one of those. Probably Nicholson framed though. Very nice turnout.

[ctk]

yep another awsome project mike. looks real fast even though its just sitting there.

[shortline10]

Installed the handle bars and cables . Thanks for all the great comments :beer .

[badass350x]

Dam that thing is looking good,, Even the grips are old school!!

[3wheelrider]

Wow Mike!!-Cant wait to see it in person.- So damn cool. I'll see ya ......later

[yaegerb]

Work of art Mike. Beautiful bike! Your gonna have to get some video of that beast running :)

What are you running for rear rubber? Are those 16 or 18 inch turf tamers?

[shortline10]

You noticed the grips :lol: old school Grab on grips .


Dam that thing is looking good,, Even the grips are old school!!

[shortline10]

The rears are 18" Armstrong I think LOL I call them the S tread pattern .




Work of art Mike. Beautiful bike! Your gonna have to get some video of that beast running :)

What are you running for rear rubber? Are those 16 or 18 inch turf tamers?

[shortline10]

She's a runner !!! Still have to recover the seat and install the fenders . A plug chop is also in the to do list with the Mikuni .

[atc007]

Looking great! Clean hands now,,or those Grab ons will be black !

[motoman1012002]

Shortline that 110 hi suspension frame would good sitting next to that 185

[shortline10]

Shoot me a reasonable offer and it will LOL .



Shortline that 110 hi suspension frame would good sitting next to that 185

[shortline10]

Rain finally stopped long enough for a little test drive . Runs pretty good but will need some fine tuning and a new HD clutch kit for sure .

[jsmay]

lets see a video of you rippin that bad ass bike!

[badass350x]

You noticed the grips :lol: old school Grab on grips .


Yes I did buddy, I have two brand new sets in the original packages from the 80's with the price tags still on the from TUCSON ATC SUPPLY here in Arizona!

[shortline10]

No fenders or seat yet , be patient :lol: I'll be like Brenden and say 1.5 more years left on this build LOL !!!!!!!!!!!




lets see a video of you rippin that bad ass bike!

[bigworm626]

Nobody likes 3 wheelers like shoreline10! NOBODY!

[shortline10]

Got some time to install the front fender and number plate also got the jetting all sorted out . I installed the barnett clutch plates and HD springs by H&S and man does it grab now :lol: .
Next I plan on doing the seat and rear fenders !!!

[xrider]

Looking Killer Mike

[yaegerb]

That is so awesome mike! Where did you get that front number plate?

[atc007]

Just a really cool piece!! Nice work man!

[motoman1012002]

Wow mike thumb throtle you know how to ride that thing

[shortline10]

Plate was made by John and I bought it out of the parts store .

That is so awesome mike! Where did you get that front number plate?

[shortline10]

No thumb throttle , it has a twist .


Wow mike thumb throtle you know how to ride that thing

[shortline10]

Got a little time today to install the rear fenders and seat .
This one is just about done !
Next project is a powroll stroker motor atc70 build

[110 atc]

I like the Mike Coe #43.

[yaegerb]

Very nice mike!

[shortline10]

Coe was #23 , Curtis Sparks was #43 !



I like the Mike Coe #43.

[110 atc]

Oh yeah, oops I'm getting old.

[RodKnockRacing]

Looks Awesome Mike

[shortline10]

Playing around with seats . I recovered another one I had and i'm kinda liking the blue over the oem black one . What ya think ?

[dirtwheels]

Looks great! Nice custom build. I like the blue seat better than the black.

[yaegerb]

Playing around with seats . I recovered another one I had and i'm kinda liking the blue over the oem black one . What ya think ?

Didn't think I would, but I really like the blue seat Mike. That's my choice.

[3wheelrider]

Me too, I liked the black cover ,- but the blue one gives it a even nicer touch.....Gotta go see that thing!!!!

[shortline10]

Hey Jimmy , how's the Hurricane down their :lol: blowing like hell here , shop is open but I gotta keep the doors closed when it gets to crazy !!!!



Me too, I liked the black cover ,- but the blue one gives it a even nicer touch.....Gotta go see that thing!!!!

[3wheelrider]

Wasnt too bad here- just few squalls- the worst appears over.

[jsmay]

the blue is killer. And I hope you guys are safe down there...

[jsmay]

just wondering... whats the front tire/rim combo?

[shortline10]

8"x 6" wide front rim with a kenda 20x7-8" inch front max tire . Works very well .



just wondering... whats the front tire/rim combo?

[vartiak15]

What kind of rope do you use in the pull starters on the bigger motors? Any thing special?

[shortline10]

1/4" marine grade nylon rope for the 185/200 and 3/16" for the 90/110 .



What kind of rope do you use in the pull starters on the bigger motors? Any thing special?

[shortline10]

Been playing around with different motor parts to get the most out of her , decided to go with a megacycle 435 lift cam and the Custom ATC ported head I got from Mrclean and I think I got her now , what a beast ! Also installed a chrome aftermarket recoil for a little more bling .

[yaegerb]

Very Nice mike! video please.

By the way, I am getting ready to get a number plate from John for my 200x. Can you tell me what size numbers those are, where you got them and how you mounted them?

[shortline10]

I have about 200 NOS maier numbers , they are 8" and fit perfect . They bolt on with plastic screws which they come with . What numbers are you wanting and what color white or black ?



Very Nice mike! video please.

By the way, I am getting ready to get a number plate from John for my 200x. Can you tell me what size numbers those are, where you got them and how you mounted them?

[yaegerb]

Do you have the numbers 7 and 6 in black?

[shortline10]

Will look tomorrow .


Do you have the numbers 7 and 6 in black?

[jsmay]

I'd be interested in an 8 and 3 in white......

[atc007]

Damit Mike,,That is the PERFECT Little hot rod !!!!!! I love that badboy !

[shortline10]

Will look tomorrow , white has yellowed a little on some of them but I will check .



I'd be interested in an 8 and 3 in white......

[shortline10]

Bill , this little bugger is a blast to ride , the low stance and the geometry of the frame makes it handle great , would make it an awesome little tt racer .



Damit Mike,,That is the PERFECT Little hot rod !!!!!! I love that badboy !

[RodKnockRacing]

Awesome Mike you need to get a video of that beast runnin

[oscarmayer]

nice trike sir!!! very nice!!

[shortline10]

Thanks all for the great complements !!!
Just about got the motor broke in and man I really like the way this bike handles .

[aldochina]

wow, that is one cool looking trike!! Dig it man!

[shortline10]

Dusted the old 185s off yesterday

[Dirtweed]

Dusted the old 185s off yesterday


Glad you did. I never saw this thread. Nice looking trike! Of course now I have some reading to do.

[TwoBobRob]

Very cool. I love the 185s.

[yaegerb]

Dusted the old 185s off yesterday

I see you ditched the armstrongs and put some oats on her.....ohhh, how I love that bike!

[ironchop]

that's badass. I bet it runs badass as well.

[bigdaddyvw185]

Dusted the old 185s off yesterday
:drool: this is the first i have seen of this thread WOW that is one awesome trike man!

[JasonB]

bad ass 185!! i like it, so clean!!

[3wheelrider]

When can I ride it????-J.K.- Hey when you want to part with it -you know who to call close-by.-:lol:.- Really, dont get rid of that one Mike- ever!!!!!
- I wish you didnt have the covers pulled over all youre machines always:lol: -( I know it keeps most the dust off) But would be nice to see them all when I do go by there:(

[shortline10]

All you had to do was ask lol , I would be more than happy to let you ride the 185 .



When can I ride it????-J.K.- Hey when you want to part with it -you know who to call close-by.-:lol:.- Really, dont get rid of that one Mike- ever!!!!!
- I wish you didnt have the covers pulled over all youre machines always:lol: -( I know it keeps most the dust off) But would be nice to see them all when I do go by there:(

[3wheelrider]

All you had to do was ask lol , I would be more than happy to let you ride the 185 .
Thanks man, I really was kidding. -I would love to get on it, but I wouldnt risk damaging it somehow (with my luck). Besides-I might make you real nervous:lol:........I am real curious what its like though.

[John jr]

VERY NICE BUILD. I really like the way it turned out. Thanks for bringing this thread back up. First time I've seen it.

[R.J.M.]

Just read this entire thread and all I can say is WOW! That is one beautiful machine...amazing work shortline.

[shortline10]

Bump for a member :beer

[Ol Deuce]

This Is / Was a great Build;) ! Thanks Mike for the re-post .:beer..Love it!!!! Ol Deuce

[waynekreitzmann]

Very cool build, inspiring!

[1979atc]

Nice build Mike looks amazing, me and my dad are thinking about doing this to one of our 185s"s, paint looks beautiful on your build.

[shortline10]

Did a little service to the 185s and took her for a spin today :Bounce:naughty:

[ironchop]

That thing is badass

Sent from my Z958 using Tapatalk

[yaegerb]

Did a little service to the 185s and took her for a spin today :Bounce:naughty:

Will you hire me? I work for yellow bellies

[shortline10]

I sure could use some experienced help .....
Over 35 machines in for service at the moment :(



Will you hire me? I work for yellow bellies

[Ahatchett]

Damn, just went through the whole thread. Thinking about building one but hopefully building it all myself.

[MrConcdid]

Awesome bike, is that the original rear hub and axle from the 185s or is it from something else?
Why has this mod not taken off with the 200cc bikes, s,m,e?

Thanks
MrC.

[shortline10]

Axle is aftermarket but for a 1982 Atc 185s . Wheel hubs are G-force extended with the more common 4 x 110mm bolt pattern .

[MrConcdid]

That is a good reason this 4/150 bolt pattern stinks.
Thanks for clearing that up.

MrC.

[shortline10]

Bump per a private message

[Jim mac]

I really need to stop looking at these builds. I've got a suspended 185s and a spare suspended frame I've got fir sale locally and I'm getting a few low offers ($300) for a running trike. I think I'm just going to hold onto the running one and just make it nice like yours. jim

[Footy]

I really need to stop looking at these builds. I've got a suspended 185s and a spare suspended frame I've got fir sale locally and I'm getting a few low offers ($300) for a running trike. I think I'm just going to hold onto the running one and just make it nice like yours. jim

If not for the distance I would have already tried to buy that suspended frame from you.

[Gumbo]

I really do love this build, it’s has such clean lines it’s looks awesome [emoji41] [emoji1305]


Sent from my iPhone using Tapatalk