10in wheel buyDeliver to TF. Wheels are HERE!!! EXTRAS where ORDERED

[Xowner]

These are honda front bolt pattern With Ashtabula coming up at the end of June I have had a few guys asking about wheels but i need 10 to step forward to get this rolling Please only post here if your 100% serious

Info about the wheels can be found in this link and the one inside it.

Any other questions please ask.

http://www.3wheelerworld.com/showthread.php/134441-10-inch-wheel-buy-New-Group-buy-starting-1-11-2011

[WIkid500]

I'm down for one, this will look good on the summers project. CRF450 conversion :)

[just ben]

I'm good for one

[Xowner]

Good start guys spread the word.......

[Xowner]

yaegerb

Wheel number 3

travis i

Wheel 4

Moshman

wheel 5

[WIkid500]

5 more, lets get some boys and girls!

[Xowner]

stroberts22 wheel number 6

[Xowner]

Louis milkman wheel 7

[Xowner]

Guys im gonna give this another week and im going to buy the other three myself to make this happen. When that happens im gonna need everyone's money up front. Once i have all the money ill place the order and in two-four weeks we should have wheels!!!!

[WIkid500]

Guys im gonna give this another week and im going to buy the other three myself to make this happen. When that happens im gonna need everyone's money up front. Once i have all the money ill place the order and in two-four weeks we should have wheels!!!!


Send me a pm when you need cash. I tend not to search for posts I forget about when they get shuffled down the list haha.

[Xowner]

Wheels were shipped to me today 3/12/12. Some should go out as early as thursday or friday ! Thanks guys. Anyone else who wanted some wheels please contact me seems there where some extra's ordered!!!! :beer

[Xowner]

Guys the wheels are here. It will prolly take me til monday to get them all boxed up and shipped.

Thanks guys

[WIkid500]

Xowner's the man!

[Xowner]

Boxed up guys and going out monday morning Thanks guys tell your friends i have extras

[just ben]

I think I will send the the shipping.I guess if I have it in hand I will find a use for it

[Xowner]

I think I will send the the shipping.I guess if I have it in hand I will find a use for it

Just let me know, Its safe in the garage but up to you.

[oscarmayer]

photos of wheel and bikes it fits?

[Xowner]

http://www.3wheelerworld.com/showthread.php/132262-10-in-no-hub-GRINDING-Front-wheelTECATE-86-87-also-honda-s-In-stock!-Pre-order-!!!!?highlight=

All wheels that were being shipped were shipped today and tracking numbers entered threw paypal

Thanks guys!

[250rs-neva-die]

just wanted to let you know that I recieved my 2 wheels today. Excellent packaging and thanks again for making it happen! Big thumbs up

[yaegerb]

Just got mine, its beautiful! thanks much!

[Xowner]

Thanks guys Makes all the work worth it when you receive praise.

[xman2rman]

I got mine and it looks great! Can't wait to get it on but there's no telling how long it will take me to decide on the tire... so many choices! :) Thanks man, great job!

[WIkid500]

Thanks Xowner! Rim is good to go!! Now I need the rest of the CRF-450 project to pile up that fast!!!

[tpit8787]

are there extras still?how much shipped to 19135?

[Xowner]

Guys i should have 10 more wheels on Friday.

[just ben]

keep em in stock I know I will eventually want more. Awesome wheels

[Xowner]

Guys almost 100% sure these will fit the 1st gen 200x with a 2 gen hub swap!

[yaegerb]

Yes these wheels fit a 1st gen 200x with a 2nd gen hub swap. I used a 1986 200x hub and swapped the axle, spacers and brake disc. Everything Converts. The only thing you will need to do is file down the inside edge of the caliper. To ensure mine was perfect I took the "high edges" off of mine and it fits like a glove. Pictures below.

[dubber97]

Hey man I need a wheel to so if you have more I will take one! One more question, Will they be running trike at pine lake this year? If so I am 100% in!!!!

[Xowner]

Hey man I need a wheel to so if you have more I will take one! One more question, Will they be running trike at pine lake this year? If so I am 100% in!!!!

Yes trikes at pine lake I called and left a message on your machine

[yaegerb]

Hey All,
For those of you that have already mounted your tires on this 10 inch wheel can you take some pictures and show me where you have drilled for the valve stem. I have never done this before and want to make sure I am drilling it correctly and not ruining a perfectly good wheel.

Thanks in advance!

[Xowner]

Hey All,
For those of you that have already mounted your tires on this 10 inch wheel can you take some pictures and show me where you have drilled for the valve stem. I have never done this before and want to make sure I am drilling it correctly and not ruining a perfectly good wheel.

Thanks in advance!

Getting ready to drill one of these my self ill put some pictures up.

[yaegerb]

Getting ready to drill one of these my self ill put some pictures up.

Great, thank you!

[Xowner]

Step one Get your wheel out make sure your gonna drill it on the right side. Weather it be on the side with the brakes or the other side. ( Yes some people want them hidden under the brake rotor) This one is getting put on the non brake side were it will be nice and easy to get two between two lugs.
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDExMTItMjAxMjA0MDktMjIzNy5qcGc.jpg

MEASURE 100 TIMES!!!! Mark the hole and drill a small pilot hole and work your way up to the size for your valve stem. Make sure to place a few pieces of masking tape to ensure you dont scratch the wheel when drilling the pilot hole. I then drill the rest of the hole from the back side.

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDExMTMtMjAxMjA0MDktMjI0My5qcGc.jpg

Make sure you read the package it will tell you what the final hole size SHOULD BE! This one wasnt popped in because the wheel is getting pc'ed !

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDExMTQtMjAxMjA0MDktMjI0Ny5qcGc.jpg

Be sure to clean finger prints off.

[yaegerb]

cool. Are you drilling your pilot hole on the chrome side first or are you drilling from the back side to the chrome side?

Thanks again! I was really wondering where to put the hole. I see you put it on the angled "step" of the wheel. Looks like it is OK to do? That was my biggest worry...if I should put it on that angle or if I should put it on the inner "step" that was flat.

[Xowner]

cool. Are you drilling your pilot hole on the chrome side first or are you drilling from the back side to the chrome side?

Thanks again! I was really wondering where to put the hole. I see you put it on the angled "step" of the wheel. Looks like it is OK to do? That was my biggest worry...if I should put it on that angle or if I should put it on the inner "step" that was flat.

pilot hole in the polished side. with some tape on the wheel

[yaegerb]

Thank you sir!

[stroberts22]

Any tricks you know to help seating the tire on the bead? I soaked the tire bead down with armor all and it still took alot of pressure to seat the bead on the brake side. The long bell to make room for the brake is hard to get started on there also. I worked on it for 2 hours and finally had to put a tube in it to start that side and broke the other side back down to take the tube out and put a valve stem in. I finally got it mounted but it was very hard.

[just ben]

Any tricks you know to help seating the tire on the bead? I soaked the tire bead down with armor all and it still took alot of pressure to seat the bead on the brake side. The long bell to make room for the brake is hard to get started on there also. I worked on it for 2 hours and finally had to put a tube in it to start that side and broke the other side back down to take the tube out and put a valve stem in. I finally got it mounted but it was very hard.I didn't have any trouble mounting the tire on this wheel.Actually it was one of the easiest I have done. next time spray the bead with soapy water then remove the schrader valve from the valve stem and use a blow gun to get the bead seated on both sides now put the valve back in the stem and inflate to the desired pressure.

[Xowner]

Any tricks you know to help seating the tire on the bead? I soaked the tire bead down with armor all and it still took alot of pressure to seat the bead on the brake side. The long bell to make room for the brake is hard to get started on there also. I worked on it for 2 hours and finally had to put a tube in it to start that side and broke the other side back down to take the tube out and put a valve stem in. I finally got it mounted but it was very hard.

What tire did you use? I Had one other person say that the tire bead seated hard too. He didnt use any soap tho.

[stroberts22]

What tire did you use? I Had one other person say that the tire bead seated hard too. He didnt use any soap tho.
I mounted a maxxis ballance razr on one and a itp gncc holeshot on the other. I was afraid to see how much air pressure it had when it finally popped on the bead. I was quickly taking out the valve core before it blew up. Like I said had it slicked down with armor all. It usually does the trick.

[jays375]

A step bit works good for drilling the hole.Any holes in sheet metal,what they mainly used for.

[Xowner]

A step bit works good for drilling the hole.Any holes in sheet metal,what they mainly used for.

Some people are scared because the "could" push to hard and go pass the size they want.....