Need help!!!

[DryCreekBoy]

Went to put my new hub and tire and wheel on my 200m which are stock hub tire and wheel.i didn't tighten it all the way down but my tire is rubbin the fork??? Why???

[ironslavery]

could you possibly have a different fork from the original?

[DryCreekBoy]

I just replaced the forks they are original forks the only thing I can think of is the triple trees are different....does anybody have any measurements of the width of triple trees at the widest part on stock 200m? Measure outside to outside if u do

[rodeofan5656]

are there spacers that are supposed to be on each side of the hub, on the axle? or are both side of the tire rubbin on the forks?

[ezmoney1979]

A picture would be really helpful if its not too much trouble.........

[atctim]

is it rubbing both sides? You didn't get a 200S or 185S front end did you? Also, do you maybe have the wheel on backwards? Valve stem should be opposite side from brakes

[DryCreekBoy]

the wheel is on correct and i only have one spacer is there suppose to be 2? where do they go?? its rubbin the opposite side of the brake 140631 140630

[DryCreekBoy]

any ideas from the pics?

[DryCreekBoy]

if u need better pics jus let me know what to take them of

[JJMF1979]

Is it rubbing on both sides? i have a 200m and when i put the baby down for a nap i will go measure and look at the spacer situation for you ok

[DryCreekBoy]

no only on the side opposite of the brakes...thanks a lot man!!!

[atctim]

Did you replace forks only, or forks and triples? By the looks of your picture, there is not much room on the side that is not rubbing.

[DryCreekBoy]

no i didnt change the triple trees it did have the wrong front hub and tire and wheel on it tho when i got it i just wanted to make sure there wasnt a simple sumthin i was over lookin before i dove into gettin new triples

[DryCreekBoy]

Hey jjmf1979 did u get a chance to take those measurments

[ZZTOP]

tire to wide ?

[JJMF1979]

Here are the measurments drycreek the top triple is 10 inches across and the bottom is 16 that is outside to outside, here are also some pictures which might help you out
140852140853140854140855

[DryCreekBoy]

ok thanks guys for the help i think i see what my problem is but im gnna double check those measurements jus to make sure