200x cam question

[PAPA250r]

2 questions on a 1984 200x

1. Is it the same cam as a 200s. ??

2. Can you remove the cam with out taking the valve cover off ?


Thanks !!!

[hoosierlogger]

Not the same cam, and yes you can remove it without dis-assembling the top end. Just be careful not to drop the cam chain in the hole.

[yamaha driver]

NOT same cam BUT if you use 200x cam bearing it will work. since 200x cam is better than 200s it will give u boost in performance

[WIkid500]

What they said! Hold the cam chain up with a screwdriver while you are taking the cam out. Then if you put a big enough zip tie around the chain it will keep it from falling down to the flywheel.