View Full Version : atc 70 motor
fannitti
01-03-2012, 09:48 PM
my buddy has a 2004 crf 50 motor with bbr stroker crank and big bore done to it said he would sell it to me. question is will it bolt up and fit good in ym 82 atc 70?
KASEY
01-03-2012, 10:29 PM
yes it will...
fannitti
01-04-2012, 07:41 AM
can i turn the kick start to pull on it?
tblumer
01-04-2012, 08:05 AM
Unfortunately you can't flip the kicker to go forward, but:
You can get an adaptor from www.hondaatc70.com to put a pullstart on that engine
http://hondaatc70.com/Niftyitems.aspx
They have some real sweet stuff
This kit from DrATV will also work if you have a pullstart already and will work on that crf engine
http://dratv.com/adyoatpustto.html
I use that on my YX150 motor
CRAZY70MAN
01-04-2012, 08:27 PM
Unfortunately you can't flip the kicker to go forward, but:
You can get an adaptor from www.hondaatc70.com to put a pullstart on that engine
http://hondaatc70.com/Niftyitems.aspx
They have some real sweet stuff
This kit from DrATV will also work if you have a pullstart already and will work on that crf engine
http://dratv.com/adyoatpustto.html
I use that on my YX150 motor
Do you have a compression release kit on your 150?? How does the pullstart feel when you start it??? Like someone tried to rip your shoulder out of socket or is it pretty smoothe??? To an extent........ I have wanted one of those but my 150 kicks awfully hard and figured it would be arm suicide to try one. Thanks in advance....
tblumer
01-04-2012, 09:52 PM
It's a firm pull but not terrible (no worse than the lifan 140 that was in it previously), I may switch out the cord for a cable or climbing rope. Fortunately I have it pretty well tuned so it usually fires with one pull. Some of the early 150's had way too much ignition advance and had horrible kickback, I did some strategic trimming on the flywheel trigger and it helped a lot. Kickback with a pullstart was no fun.
Dirtcrasher
01-04-2012, 10:27 PM
It's not even a 200CC, I wouldn't sweat it........
fannitti
01-09-2012, 09:55 PM
my buddy just got a ssr 110 pit bike and it needs clutch work, question will that motor bolt up and work in my trike, and will everything line up? also can i do a pull start conversion to it?
fannitti
01-11-2012, 05:17 PM
Bump back to the top
atc350xer
01-11-2012, 07:24 PM
it should...
bannedbrraap
01-18-2012, 11:25 PM
yeah the ssr 110 is a lifan engine...will bolt right in and you can do the pull start mod
fannitti
01-20-2012, 01:57 PM
the thing is a manual can i convert that to semi auto
ezmoney1979
01-20-2012, 02:15 PM
the thing is a manual can i convert that to semi auto
What for? If you dont want a performance set up, get a stock 70 motor.
350xx
01-20-2012, 03:46 PM
ssr is lower grade than lifan.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.