lartrike
12-28-2011, 08:08 AM
hey whats up 3wwers, i need help with my 85 ytm 225. i am going through the bike cause i just bought it, fixin brakes ect. i wanted to check out the front wheel
components ect so here is my question, i loosened the axel nut and on the last thread the nut shot off and the fork has come out couple inches. are ytm's
suppose to be like this? it doesnt seem right that with a ratchet strap around the forks the axel bolt still dosnt have enough thread to start the nut. i hope
someone see's this and can help me out. im thinkin the forks are bent, so im gunna take em off the triples and square em up. i was thinkin worste case before and
if they r bent i can bolt up wheel and then put the assy back in triples, unless there is a trick to these? thanks in advance
components ect so here is my question, i loosened the axel nut and on the last thread the nut shot off and the fork has come out couple inches. are ytm's
suppose to be like this? it doesnt seem right that with a ratchet strap around the forks the axel bolt still dosnt have enough thread to start the nut. i hope
someone see's this and can help me out. im thinkin the forks are bent, so im gunna take em off the triples and square em up. i was thinkin worste case before and
if they r bent i can bolt up wheel and then put the assy back in triples, unless there is a trick to these? thanks in advance