250R Suspension

[scottytohotty48]

Ive decided to take a brake from ridin those dirty four wheelers and start my trike back up again. With the bacl end off and then engine out Im not sure how the motor mount and the rear shock go in. Both the clymer and shop manual seem to be fairly dusty in this area. The shock is to wide to fit in the frame mount or the engine mount:wondering. I need help badly.

[sbjones73]

year of the 250r ?

[scottytohotty48]

Forgot to include that. Its an 84.

[scottytohotty48]

Can anyone help me?

[Yamaha_Rules69]

Have an assistant help you. Place the engine in the frame, and put in the swingarm bolt through the frame, motor and swingarm like it should go. You should now be able to see how it goes together, unless you are missing some pieces? Why was it apart anyway?

[EarlyBronocGuy]

137439 137440

The engine/shock mount goes vertical, with the narrow end at the top and oriented to the rear. The top of the mount bolts to the frame bracket that also supports the front of the airbox. The front of the shock bolts to the mount holes just under that. The swingarm pivot bolt goes through the tube in the mount, the other 2 holes in the mount (front and bottom) are for engine mounting bolts. The Clymer manual has a pretty good diagram of the shock linkage.

[buzzy613]

would that mount workon an 85?

[scottytohotty48]

I replaced all the seals and bearings in the bottom end, replaced the crank and did a top end job as well. But being caught up workin on my sleds I havnt had a chance to work on her for a while. Thanks for the pictures BronocGuy ill take a look tommarow