PDA

View Full Version : Atc 110 baffle & needle clip ?



Trikeboss
12-08-2011, 11:04 PM
Just wondering if anyone runs there atc 110 without the exhaust baffle?

Also what needle clip position are you running? (with or with out the baffle)

Im asking about the needle clip since I have a slight bog/miss but only if im going up a steep hill and want to adjust the needle to see if it helps...
If I pin the gas before the hill it will climb it no problem but if I hit the gas under heavy load up a hill it will cut out/bog a bit...

:beer

yamaha driver
12-09-2011, 09:19 AM
ok all my 110s i had were straight piped lol. but one i had with stock pipe you cant take out the baffle just the spark arrestor. the baffles are inside the pipe. when mine were straight piped i was 1 down from the middle. But mine used to do that to if i would go ditch climing and doing about 1/4 throttle then hammer it, it would almost kill. i found out it was my valves set at 0 for clearence.