Timing Chain Tensioner Lifter

[murfman]

I am rebuilding my 350X motor, and want to replace the timing chain tensioner lifter I have an 85, but the cylinder is bored to accept the 86 style, unfortunately neither one is available new, however part # 14520-HA0-771 shows as still available and was used on the TRX 350 the TRX 350 used the same guide and tensioner as the 350x. Will this tensioner lifter work on a 350X?

Here is a list of what this lifter fits:

1987 ATC250ES A CAM CHAIN + TENSIONER
1987 TRX250 A CAM CHAIN
1987 TRX250X A CAM CHAIN
1987 TRX350 A CAM CHAIN
1987 TRX350D A CAM CHAIN
1988 TRX250X A CAM CHAIN
1988 TRX300 A CAM CHAIN
1988 TRX300FW A CAM CHAIN
1988 TRX350D A CAM CHAIN
1989 TRX300 A CAM CHAIN
1989 TRX350D A CAM CHAIN
1990 TRX300 A CAM CHAIN
1990 TRX300FW A CAM CHAIN
1991 TRX250X A CAM CHAIN
1991 TRX250X AN CAM CHAIN
1991 TRX300 A CAM CHAIN
1991 TRX300 AN CAM CHAIN
1991 TRX300FW A CAM CHAIN
1991 TRX300FW AN CAM CHAIN
1992 TRX250X A CAM CHAIN
1992 TRX250X AN CAM CHAIN
1992 TRX300 A CAM CHAIN
1992 TRX300 AN CAM CHAIN
1992 TRX300FW A CAM CHAIN
1992 TRX300FW AN CAM CHAIN
1993 TRX300EX A CAM CHAIN
1993 TRX300EX AN CAM CHAIN
1993 TRX300FW A CAM CHAIN
1993 TRX300FW AN CAM CHAIN
1994 TRX300 A CAM CHAIN
1994 TRX300 AN CAM CHAIN
1994 TRX300EX A CAM CHAIN
1994 TRX300EX AN CAM CHAIN
1994 TRX300FW A CAM CHAIN
1994 TRX300FW AN CAM CHAIN
1995 TRX300 A CAM CHAIN
1995 TRX300 AN CAM CHAIN
1995 TRX300EX A CAM CHAIN
1995 TRX300EX AN CAM CHAIN
1995 TRX300FW A CAM CHAIN
1995 TRX300FW AN CAM CHAIN
1996 TRX300 A CAM CHAIN
1996 TRX300 AN CAM CHAIN
1996 TRX300EX A CAM CHAIN
1996 TRX300EX AN CAM CHAIN
1996 TRX300FW A CAM CHAIN
1996 TRX300FW AN CAM CHAIN
1997 TRX300 A CAM CHAIN
1997 TRX300 AN CAM CHAIN
1997 TRX300EX A CAM CHAIN
1997 TRX300EX AN CAM CHAIN
1997 TRX300FW A CAM CHAIN

1997 TRX300FW AN CAM CHAIN
1998 TRX300 A CAM CHAIN
1998 TRX300 AC CAM CHAIN
1998 TRX300EX A CAM CHAIN
1998 TRX300EX AC CAM CHAIN
1998 TRX300EX AN CAM CHAIN
1998 TRX300FW A CAM CHAIN
1998 TRX300FW AC CAM CHAIN
1999 TRX300 A CAM CHAIN
1999 TRX300 AC CAM CHAIN
1999 TRX300EX A CAM CHAIN
1999 TRX300FW A CAM CHAIN
1999 TRX300FW AC CAM CHAIN
2000 TRX300 A CAM CHAIN
2000 TRX300 AC CAM CHAIN
2000 TRX300EX A CAM CHAIN
2000 TRX300FW A CAM CHAIN
2000 TRX300FW AC CAM CHAIN
2001 TRX300EX A CAM CHAIN
2001 TRX500FA A CAM CHAIN
2002 TRX300EX A CAM CHAIN
2002 TRX500FA A CAM CHAIN
2003 TRX300EX A CAM CHAIN
2003 TRX500FA A CAM CHAIN
2003 TRX650FA A CAM CHAIN + TENSIONER
2004 TRX300EX A CAM CHAIN
2004 TRX500FA A CAM CHAIN
2004 TRX500FGA A CAM CHAIN
2004 TRX650FA A CAM CHAIN + TENSIONER
2004 TRX650FGA A CAM CHAIN + TENSIONER
2005 TRX300EX A CAM CHAIN
2005 TRX500FA A CAM CHAIN
2005 TRX500FGA A CAM CHAIN
2005 TRX650FA A CAM CHAIN + TENSIONER
2005 TRX650FGA A CAM CHAIN + TENSIONER
2006 TRX300EX A CAM CHAIN
2006 TRX500FA A CAM CHAIN
2006 TRX500FGA A CAM CHAIN
2007 TRX500FA 2A CAM CHAIN
2007 TRX500FA A CAM CHAIN
2007 TRX500FGA 2A CAM CHAIN
2007 TRX500FGA A CAM CHAIN
2008 TRX500FA 2A CAM CHAIN
2008 TRX500FA A CAM CHAIN
2008 TRX500FGA 2A CAM CHAIN
2008 TRX500FGA A CAM CHAIN
2009 TRX500FA 2A CAM CHAIN + TENSIONER
2009 TRX500FA A CAM CHAIN + TENSIONER
2009 TRX500FPA 2A CAM CHAIN + TENSIONER
2009 TRX500FPA A CAM CHAIN + TENSIONER

[murfman]

Anyone? Are there different spring rates for the tensioners? If it physically fits will it work? I have one off my 300ex that looks similar, just not sure if they all work the same. Thanks in advance Murf

[atc007]

If it bolts in,and is the right length,,it will work. My minds blown that Rincon is the same??? Anyhow,,a TRX 350 4x4 Should work,,depending on WHO did WHAT to that cylinder!? If the 300EX goes in, and is the right length,it will work.

[murfman]

Hurricane635 on the board here did the cylinder, it has been opened up to fit the 86 style adjuster.