Honda 350x

[John Ray]

I have a chance to get a running 350x for 500bucks.... He says it runs good... The plastics look good from the pics... He says the handle bars are bent, and that it could use a new chain and sproket.... Is this a good deal?

[beets442]

Yes, it is. Set of bars,chain and sprockets might set you back $100. Memorys riding that 350X, priceless....

[falloutboy]

sounds like a deal. look for cracks in the frame. mostly around where the subframe attaches and on the back bone, under the tank...

[bugler30]

under the left side upper rear motor mount, pretty much everywhere. Step 2. get the Gusset kit from TPC trikes and get that installed by a good welder, or get a hold of Dirtcrasher on here he also does this. However shipping those frames is not cheap. I can hook you up with some OEM handlebars for it if Renthal approves my warranty return. Also check your rear bearing carrier, pivot bearing and neck bearings for slop. In any case $500 is a good deal it just depends on how much $ you have to chase down the gremlins.