82 200 need help

[bigred_84]

Hello everyone. I am new here and recently bought a 82 200. The guy I bought it from said the magneto was bad so he took it apart and bought a newly used one. The problem is he didn't put it back together and now that is my problem. I have the manuel for it but he put all the bolts in a box so I have no idea what bolt goes where or how many i'm supposed to have. Is there any place I can find this or maybe someone else might be able to help. Thanks for your time. It is taken all the way down so if you look at the side of the motor on the left side you can see the timeing chain.

[Chazz of Blades]

Worry about getting the engine together before worrying about the magneto. If my lack-of-sleep mind is getting the terminology correct, it's the bit that attaches onto the cam, under the CDI cover on the engine. You need to have everything together and assemble that once the engine is together. It's very simple after that. I had trouble with an S not firing right once, and the key for the magneto had come out somehow and wasn't lining up correctly.

Can't find the service manual for the 82 200, but the engine should be the same for the 84+ 200s.

http://72.52.143.80/~trikes/Manuals/ATC%20manuals/ATC200S%2084-86%20Shop%20Manual.pdf



Did find the owner's manual for it though.

http://3wheelermanuals.22web.net/3W_OwnersManuals/own82atc200.pdf

[bigred_84]

The engine is together all except what I said before. I don't know what bolts go where and how many I am supposed to have.