200x Parts Stash

[xrider]

I've been collecting first gen 200x parts for a flat track build for about 4 years now. Figured I would post up some pictures of some of the rare parts I've gathered. I'll post the pictures by type of part.

1. Westcoast Performance Parts
The swingarm on the right is the Heavy Duty model. The swingarm on the left is the light model. In front of the swingarms is a Westcoast shock linkage and a Master cylinder guard as well. The last picture is the extended hubs from Westcoast.

http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0334.jpg
http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0339.jpg
http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0305-1.jpg

2. NASA

Pictured is an Axle nut set, a NOS Fork Brace, and a Lightly used Fork Brace. I also have a NOS +5.5" axle that is at my shop.

http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0340.jpg

3. Intakes and Carburators
The carb and intake on the left of the picture is the original kit offered from DG. The carb with built-in intake on the right is the original kit offered from Curtis Sparks. The intake manifolds pictured are a sand scorcher and a Mossbarger. Notice how short the Mossbarger intake is, it was made for very big carbs.

http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0341.jpg
http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0345.jpg

4. Fuel Tanks
The red tank is a NOS IMS short track tank. The white tank is a scoopless tank, formerly from Seadoo's racer.

http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0347.jpg
http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0353.jpg

5. Exhausts
Starting from the top is a PK Performance Plus, a Skyway, and a Kerker.

http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0346.jpg

6. Controls
The first picture is old school NOS Oakley grips. The second picture is a NOS Sunline Debruzer bar pad and Low Profile Answer 200x bend handlebars. The third picture is a HD Terry Cable throttle cable for a 28mm mikuni for a 200x. The throttle is a swedish made Gunnar Gasser.


http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0351.jpg
http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0354.jpg
http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0352.jpg

7. Missle Engineering
Here are some pictures of the Missle Engineering Flat Track parts. Not pictured is the shock strut and nerf bars that are at my shop.

http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0349.jpg
http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0348.jpg

8. Number Plate
Maier NOS Screen Number Plate

http://i737.photobucket.com/albums/xx18/zwaylo/DSCN0357.jpg


These are just the parts I have loose in my apartment. The next time I am up at my shop I will snag some pictures of the rest of my 200x parts stash. Hope everyone enjoys. Thanks, xrider

[Xpress]

Do you take checks? :lol: Some VERY nice parts you got just lying around there....

[yooperman]

oh man i am drooling here heck of a stash you have. i cant believe you have a west coast brake res gaurd i have been looking for one of them for a long time.

[three_wheelin45]

wow!!! when you gona put them bad boys in use ;)

[shortline10]

Nice little stash their Matt !!!!!!!!!!
I know were you can get some more LOL .

[torque]

i'm jealous! you got a real nice collection.

are those carbs 28 or 30 mm?

[scruffy390]

Very nice stuff you have there!!!

[leevarnado]

i have that same skyway exhaust,some very nice old school parts you got there.

[dirtface]

That Skyway exhaust sure does look like my Bassani, did Bassani make them for Skyway? I have a Westcoast swingarm for the first generation 200x too, but I'm missing the shock linkage part, Anybody have any ideas?

[motoman1012002]

I see a couple of my old parts in there good luck with the build

[Buster Brown]

Nice! Ganna be a real sweet vintage build.
Love your NOS collection! Thanks for sharing.

Man you're suck in the '80s too... Nice 1st gen Nintendo! Love it.

[yooperman]

ha ha i didnt even notice that till you said something about that nintendo that is awsome. soooooooooooooooooooooo any of that stuff for sale lol some one has to dream right.

[xrider]

Nice eye Andy, I was waiting for someone to mention the Nintendo, LOL. The carburetor's are both 28mm, one mikuni, one keihin. I bought a frame for this build about a month ago. so I plan on starting a full build thread this fall. It will be a 100% period correct vintage racer. To answer your question Yooper, yes some of these parts will be for sale. I plan on this being my last 200x build, so most of the parts not used will be sold. 2 of the exhausts, the light weight westcoast swingarm, 1 of the fork braces, the DG carb and intake kit, the mossbarger intake, the sand scorcher intake, and maybe the Red IMS tank are some of the items that will eventually be sold. All other items pictured here will be used in the build.

Thanks for looking, xrider

[Vealmonkey]

I think I may know that missle kit! LOL Plus the temporary ownership of the strut. That's the stuff when I think about the missle kit, not that 2 wheeler conversion "stuff"! LOL You have to come up with some more of those missle kit parts and spread the wealth. I sure could use the wheel and hub set ups!

[yooperman]

sweet i will be keeping an on your stuff to see what comes up for sale lol, and to check this bad boy out when its done. plus i have to give veal a run for his money on this stuff bwahaha.

[torque]

i sure would like to call dibbs on the dg carb and intake. lol

[Vealmonkey]

I really dig the m/cyl guard and the hubs. If you are going to use the missle kit, you really need to find a wescoast -1, now they are rare!!! I think they were built special order. Man, those missle flat track kits are sexy as all get out. I've been waiting on the edge of my seat to see this trike assembled as a roller for a while now. I had to reunite the strut with the missle kit. I really wanted to get that on ebay when it sold.

[xrider]

I have to agree Veal. I've been trying to find a stock length or a -1 200x aftermarket swingarm for a while, but they are few and far between. It was hard enough to find the +2 Westcoasts. The wait will be over soon, I have to install the new races for the needle bearings into the frame and then it is off to the powdercoaters.

[matt3x]

drooling over here. nice collection!