ytm 225 wheel spacers

[swampthang]

I know I've seen some guys on here have some wheel spacers on there 225s but I cant find any by searching. If you got some pictures please post them for me. I think my DX needs widend up alittle it's just too tippy and doesn't want to slide the corners very well. Just wanting to get a idea of how wide too go and what it will look like.:)

[Lil Earl]

im curious on this as well

[350Xccelerator]

Whats the bolt pattern?

[leevarnado]

the stock rear axle bends easy,even easier with spacers.something you might want to think about.

[MonroeMike]

Whats the bolt pattern?
http://www.mud-throwers.com/atv_wheel_chart

[Greaser1]

I know I've seen some guys on here have some wheel spacers on there 225s but I cant find any by searching. If you got some pictures please post them for me. I think my DX needs widend up alittle it's just too tippy and doesn't want to slide the corners very well. Just wanting to get a idea of how wide too go and what it will look like.:)

The lug pattern is a 3x100mm. I do all kinds of dumb stuff with mine and never bent an axle.

This is a picture of the spacers along with a couple of shots of my YTM. I have 27" Essex Surefoots on it now, one of the pics shows a mock-up before I installed the 27s. Kinda looks like a Tractor :)

130208130210130209

Here's a link to the site...

http://www.durablue.com/prod_display/Wheel_Spacers/17/0.php

[bigdarren]

or you could use tri z hubs and wheels