PDA

View Full Version : wheele hub help



ford4x4302
07-29-2011, 01:28 PM
Hi i have a 1985 honda big red 250 and need a left wheele hub and i found a right side one and was wondering if it would fit on the left also would a 250sx hub fit. Thanks

tri again
07-29-2011, 05:59 PM
Thats a good question.
It's rare that they go bad like the earlier (84) models.
Make sure they are tight/torqued and I also grease the splines when going back together.

I have one of each apart right now to do rear brakes so I'll try to
get out there and look.

Faster may be to cross reference part numbers
at bikebandit.com and see if the part numbers are the same.
or just swap the good one to the other side or try to see if the match up somehow.

and you know there are shop manuals for free in the 'world class help'
section in trikesylvania?
welcome, btw.

ford4x4302
07-29-2011, 06:23 PM
the hub is the same on the sx and the big red.

gomer202
07-29-2011, 07:40 PM
don't the big red and sx have the same rear end

ford4x4302
07-29-2011, 10:51 PM
i am pritty shure they do

gomer202
07-29-2011, 11:21 PM
i am pritty shure they do

thats what im thinking