I need high quality pics of trailpros

[Dammit!]

Don't ask why. You'll find out later.

I need the pics from varying angles. Mounted on a rim preferred. A little lower than eye level, looking at the tread from directly behind, then a couple slightly to the side but keeping the camera straight. In sunlight with the shadows away from the camera.

I can shoot some examples if need be. I just don't have any trail pros.

[swampthang]

This is the only picture I have on my computer right now. IDK if it would do you any good? I still have 1 trailpro left but its unmounted, If you could give me a picture of what you going for I can try and take some new pictures for you Dammit!

[SYKO]

this guy........... I finaly get rid of 20+ pro's and he needs some modeling pics of one now....... I tell you what......

[Dammit!]

See attached. This has to be done with a fairly high res camera. The one I shot this with was only 4 megapixels and won't work because to the get the right angle you have to back up. 5 megapixels or better would be ideal. This one isn't perfect but it's got just about the right amount of the side of the tire showing. Needs more even lighting than this.

I need a few variations of this from just slightly different angles so I can choose the right match. Then I'll need the full res pics emailed to dammit987@hotmail.com.

128708

[Dammit!]

I just did a little test using the pic above and it actually worked really well other than it's not a trail pro and the lighting has too many shadows. Something just like that will work nicely.

[Vealmonkey]

Look for OC250rs' pics of his 500 Tiger, lots of different pics of trail pros. Original equipment on Tiger 500s!

[swampthang]

IDK much about cameras but my digital camera says 10.1 megapixels on the front so im assuming that parts good. My trailpro is unmounted but if it still helps I can try to get you some pics tommorow suns already heading down now. How far should I stand back from it and is the shadow a big deal or could it be shot at noon?

[just ben]

are you getting a new tattoo? I can take any pic of them you want but they a very well worn.

[TatTooL23]

A worn trail pro?? Is there such a thing? I have a pair on rims but won't be to them until saturday

[Dammit!]

The pic should be about the same range and angle as the one I posted. That one worked damn near perfect.

[Silverado]

One of the guys who came out this spring to ganny had 250 with trailpro's what had be worn down smooth ! i never asked , but I am guess he must have about 600,000 km on the tires to do that lol

[Red Rider]

Don't ask why. You'll find out later.I already know what you're up to. You're asking Dunlop to start production on a new 23x8x11 tire for the front of our 250R's. They've agreed, and asked for your input on the ultimate tread pattern, thus the trailpro pics. This is simply brilliant, and I can hardly wait for these new high-performance tires!

[muthey]

I will see if I can get you the pic you need I can load my 225 up in my truck and take the back fender off and try and get you the right lighting and shadows as you asked, my Trail pros are on my trike but it only takes a few minutes to take them off if needed

[Dammit!]

They can be on the trike. Just don't get a pic of the axle side.

[swampthang]

Dammit will any of these pics help you out? If you think they will I can try an email them to you.

[hillbilly 200x]

One of the guys who came out this spring to ganny had 250 with 's what had be worn down smooth ! i never asked , but I am guess he must have about 600,000 km on the tires to do that lol lol do you mean 86250sx' 350x that died and my dad towed home

[Dammit!]

Dammit will any of these pics help you out? If you think they will I can try an email them to you.

Send me those last two. I think one of them will work.

Thanks!

[swampthang]

I emailed you the last 2 and another one that I had from the other side. Let me know if you dont get them.

[Dammit!]

Got 'em! Thanks a ton!

[swampthang]

Got 'em! Thanks a ton!

No problem man,SOOOO..... when will we see this secret project unveiled??

[Dammit!]

No idea. I might post up a sneak peak though once I get it looking right.