View Full Version : I need Help!!
Auto_Demon
07-25-2011, 11:05 PM
k so my trike has been sitting for about 2 months cuz i was waiting for my axle bearings and they finally came in so i put them in and i went fo a ride and when i was out there i stopped to check on things and i saw my carburetor leaking alot of gas so i shut it off and i waited for a bit then i quckly rode home. so i took the carb apart and adjusted the floats put it back together and it still leaks, so i did it again and now its not getting any gas! so i reffered to my manual and it said that the floats need to be 20mm from the base of the carb without touching the needle so i did this and it still leaks gas!!! please i need help asap:wondering
59GMC
07-25-2011, 11:10 PM
u must have screwed somthing up when u took the carb apart cz trailprotrailpro an idot and shouldent mess with things if u dont know what u r doin. jk, haha
jordan_muirhead
07-25-2011, 11:14 PM
leaking out the bottom?
Auto_Demon
07-25-2011, 11:24 PM
u must have screwed somthing up when u took the carb apart cz trailprotrailpro an idot and shouldent mess with things if u dont know what u r doin. jk, haha
no i took it apart right, it never did this when i stopped riding it
Auto_Demon
07-25-2011, 11:25 PM
leaking out the bottom?
ya its leaking out of 2 places , one out the back of the carb and a tube coming out the side
jordan_muirhead
07-25-2011, 11:32 PM
did you hook the fuel line on top...or on the side?
just ben
07-25-2011, 11:39 PM
chances are something is holding up the inlet valve. doesnt take much clean the needle and seat set the float to spec and ride
badass350x
07-26-2011, 10:31 AM
yep needle and seat needs cleaned or replaced. its not shutting your gas off when the float rises.
Auto_Demon
07-28-2011, 12:46 PM
we fixed the problem some how, butg thanks for the help guys
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.