New trike,Yamaha tri zinger

[code200k]

Found this on my way back from jetski-ing..paid 170 only thing that is missing is the front fender.Seat is a lil beat up but other then that all good cosmetic wise.Problem is that it wont rev up.I switched it between run/start that makes no diffrence,Clean the carb which wasnt that bad.The guy who i got it from claimed it ran great till the kid played with the choke lever,which works fine.Somebody rigged up a light to it though,do you think that could be causing this?more pics later

[Thorpe]

I would bet a buck, the exhaust is plugged... Take a 1/2" drill bit, pull the silencer off the expansion chamber, and drill a half inch hole through the screen inside the expansion chamber... Re-assemble, and report back....

[rayatc84]

I would bet a buck, the exhaust is plugged... Take a 1/2" drill bit, pull the silencer off the expansion chamber, and drill a half inch hole through the screen inside the expansion chamber... Re-assemble, and report back....

Before drilling, I would try to run it without silencer, and after without expansion chamber.
And I would inspect their inside: wasps often like to build their nest in small exhaust when they are not used...
You could test with compressed air to see if it's plugged.

[code200k]

well after doing some searching around i found out the exhuast are know to plug up on these.So i will be removing the pipe and trying to clean it out.One of the bolts for the pipe to head connection is snapped so i will have to remove and replace at work.Will be reporting back soon thanks guys

[code200k]

Ride Report: I got ride of that stupid screen and it opened right up.I like this better then My old alt 50 mainly because i fit on this thing:lol:.Sure is fun though.Beside pipes and reeds is there any other hop ups still on the market?

[Thorpe]

So it was the screen in the expansion chamber? There are 2 different gaskets where the pipe meets the head, one is a restrictor, and one isn't... PW50 clutch, aftermarket exhaust, oil injector elimination... (premix) There are a few nasty ones lurking around on the forum!

[code200k]

yes removeing the screen in the chamber seemed to do the trick.More searching around I do the more I see awsome zingers.Cant wait till i build this one up..The oil injection is gunnna be the first to go

[Thorpe]

Amsoil.... 80:1!!

[code200k]

Amsoil.... 80:1!!

i prefer to run my toys on yamalube.But Im not starting an oil thread lol

[dcreel]

Anyone have a pic of where this screen is located? I'm going to assume my exhaust doesn't have one because I didn't find one.. but, you never know..

[gomer202]

cute looking bikes ive always like the little zingers!

[Thorpe]

Doug... The screen is inside the expansion chamber... Usually fouls up with unburned oil. If you take the stinger off, and ram a 1/2" bit into the expansion chamber... (through 1 layer of metal!)

[dcreel]

Doug... The screen is inside the expansion chamber... Usually fouls up with unburned oil. If you take the stinger off, and ram a 1/2" bit into the expansion chamber... (through 1 layer of metal!)

Ok, thank you.

[rayatc84]

Doug... The screen is inside the expansion chamber... Usually fouls up with unburned oil. If you take the stinger off, and ram a 1/2" bit into the expansion chamber... (through 1 layer of metal!)

Sorry for my bad english, but I didn't understand what is this screen and where it is located.
Could you explain it in more detail please?

I don't think my Zingers have some, but in fact I have never paid attention so I don't really know and I would want to verify...

[code200k]

the screen is between the expansion chamber and the silencer.

[Thorpe]

I believe it functions as the spark arrestor... Mine woke right up, once I drilled it out....

[code200k]

where is the best place to get tires for these? I am running the stock rims

[CRAZY70MAN]

Ride Report: I got ride of that stupid screen and it opened right up.I like this better then My old alt 50 mainly because i fit on this thing:lol:.Sure is fun though.Beside pipes and reeds is there any other hop ups still on the market?



http://www.3wheelerworld.com/showthread.php?130474-Off-to-raffa-s-in-a-box!!-Hypoid-zinger-motor-build&highlight=

[code200k]

nice build there crazy70.btw how is that coming?My question is whats years clutch and reeds swap from the pw 50 to these?