help plz

[tucker]

I purchased a honda 3 wheeler about a month ago it was advertized as a 200 big red , I need a carb a front sproket and another small thing or 2 but my problem is I have no clue what year or size this thing is plz help me out I have pics I attatched one is of numbers stamped on the frame under the handle bars I can get parts just need a place to start on size and year model, thanks:)

[atctim]

That looks like an 81 or 82 ATC185S to me. the gas tank is aftermarket. Is it plastic? Looks to be. It also has a front axle extender up front.

[jordan_muirhead]

looks like a 200s to me.....maybe 1981-82ish, dont hold me to it tho

[jordan_muirhead]

my bad, i meant 185s,81-82ish

[tucker]

Thanks for the help guys and yes it is an aftermarket tank, the front is rigged for brakes it just don't the cables hooked up, also I need the front drive sprocket and cover for it,

[bigworm626]

I have a spare 200s carb if intersted, pm me.

[Tuff]

not a 185 or a 200s. it looks like it has Hi/Lo range and I don't think 185's had hi/lo. looks like a 200E that is missing its racks to me

[Tuff]

is that not where the selector switch goes for Hi/lo range? click the pic, then click it again to see where I marked it. :beer

128337

[jordan_muirhead]

oh, ok, i was wrong then, i didnt know anything about hi/lo, guess i leaned somethin today

[ametzker]

Are you guys serious? Pretty sure the part thats circled in the above pic is the output shaft where the sprocket goes. Carb and sprocket could be found on Ebay in 30 seconds. Have fun

[jordan_muirhead]

oh....ummm...well...i retract my previous statement then...but i guess i still learned somethin

[Tuff]

oh, ok, i was wrong then, i didnt know anything about hi/lo, guess i leaned somethin today:beer I am not sure its a 200e either, I do not see a starter, unless it missing.

Tucker...on the left bar near the grip, do you see a push button? under the headlight and kill switches.

[MonroeMike]

http://atcvin.webs.com/

Decoding Results: 1982 ATC 185s

[Tuff]

Are you guys serious? Pretty sure the part thats circled in the above pic is the output shaft where the sprocket goes. Carb and sprocket could be found on Ebay in 30 seconds. Have funyeah, I see that now. on mine the sprocket is directly behind my Hi/Lo selector. My bad :beer

[tucker]

Thank you guys for all help, id doesn't have the electric start and that marked place is where the sprocket goes, once again thank you all, ill post picks when I get it slingin mudd