Tri-Z Pipe Official ID Thread

[Tri-ZNate]

Thanks Xowner and Raffa for making me do this.
This thread is intended to eliminate some of the confusion between which pipes are which. Pipe pics I am missing are Sand Scorcher, Factory Five, Answer, and FMF. If you have one of these pipes please post a pic.

DG (Ronnie wouldnt approve if I left it out)
http://www.dgperf.com/images/bikes/01-4009LG.jpg

Difference between DG and Phase 5 http://www.3wheelerworld.com/showthread.php?93116-What-the-hell-Tri-z-pipe-did-I-just-buy

Phase 5
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/262282_216868885023330_100001006604640_606828_2456 160_n.jpg

Cobra/Factory Tri (Confirmed by Brett Driscoll)
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/267933_216904251686460_100001006604640_606882_7061 599_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/271026_216904275019791_100001006604640_606883_5662 715_n.jpg

Coffman or PK. If anyone knows exactly which it is please enlighten us
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/282147_216868638356688_100001006604640_606823_6133 286_n.jpg

CRF
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/282690_216868665023352_100001006604640_606824_1326 441_n.jpg

Jemco (Thanks to ZmPolarisTech)
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/262001_216868728356679_100001006604640_606825_5529 491_n.jpg

Klemm (Thanks to 03OrangeShee)
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/282132_216868775023341_100001006604640_606826_4606 152_n.jpg

LRD Non Adjustable (Thanks to Billy)
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/281475_216868825023336_100001006604640_606827_5414 264_n.jpg

LRD (Thanks to Mike From Long Island)
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/270632_217374468306105_100001006604640_608256_7794 075_n.jpg

Bassani
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/282209_216831448360407_100001006604640_606773_3895 295_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/269735_216823431694542_100001006604640_606768_6826 44_n.jpg

Bills Pipe (Thanks to JEB)
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/264905_216890255021193_100001006604640_606869_4579 89_n.jpg

Unknown Pipes If you know the make please speak up

(Xowner)
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/268867_1896591100546_1414650207_31702828_4922723_n .jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/284744_216907581686127_100001006604640_606886_6227 783_n.jpg

[Bryan Raffa]

Ya Nate glad this is getting done! Post up your Triz pipe pics!!

[Xowner]

Great job nate!

[zmpolaristech]

AWSOME thread!! I've never seen half of them before

[zmpolaristech]

also, that jemco pipe is for a 310 engine...VERY different than their 250 pipe. ATCEric has a 250 Jemco on his big bore Z, got to compare em at trikefest.

[badass350x]

Awesome Nate!!

[Xowner]

I have a coffman coming complete with silencer, Its out getting dents and such removed.

[tommerp]

Wow ok... The guy I got my pipe from told me it was an Answer.. but looking at the pix here, I'm thinking it's a Phase 5... Thanks! Very informative!

Here are a couple dirty pix of it... https://lh4.googleusercontent.com/-ZkG5pjY9E1E/Th8rA3eVcWI/AAAAAAAAArI/9eOf2HvlStY/s1024/IMG_20110714_002738.jpg https://lh3.googleusercontent.com/-FqAgXH_MgeM/Th8rA8s0sCI/AAAAAAAAArE/SDXcqDP5Bjo/s1024/IMG_20110714_002820.jpg

[mike from long island]

Here is my orginal LRD for the list

[RodKnockRacing]

nice job nate

[stalker stopper]

Does anybody know what pipe this is? Besides rusty! lol

Thx

[Tri-ZNate]

The loops for the exhaust springs, are both ends of the loop welded or just one side?

[stalker stopper]

The loops for the exhaust springs, are both ends of the loop welded or just one side?

Not sure if you are talking to me. There are 3 open hooks on the pipe for springs.

[Tri-ZNate]

Open hooks then its a phase 5 pipe according to the thread in my original post

[YAMAHARIDER420]

Thanx for posting this I believe mine is a Coffman.... Im in need of a silencer for it does anyone have any images of a silencer for a Coffman.

[zmpolaristech]

Here is a pic of my coffman silencer on my race bike... it is mated to a jemco pipe, so it IS mounted a bit different than normal.
http://i530.photobucket.com/albums/dd346/zmpolaristech/330%20Tri-Z%20Build/Finished1-20-11049.jpg

[YAMAHARIDER420]

Here is a pic of my coffman silencer on my race bike... it is mated to a jemco pipe, so it IS mounted a bit different than normal.
http://i530.photobucket.com/albums/dd346/zmpolaristech/330%20Tri-Z%20Build/Finished1-20-11049.jpg

Cool Thanx man, I did'nt know it was a actual Coffman silencer...

[Just-Tri-It]

Can you help me id some of these?


131912 DG or Phase 5 ? No Stamp

131913 DG? or Phase 5? No Stamp



They all have open hooks. Why did DG supposedly stop putting stamp on their pipe?
Thanks

[Xowner]

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDA5MjgtMjAxMjAxMTYtMTcyNS5qcGc.jpg

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDA5MjctMjAxMjAxMTYtMTcwOS5qcGc.jpg


PK?

[nstyle73]

I don't know, but I think I have that same "silencer" but mine is so rusty, I can't make out any markings. Mine is more of a header extension as I don't think there is any glass in it.

[Xowner]

Got a new one to add to the thread

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAzNjItMjAxMjA2MDUtMTU0My5qcGc.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAzNjMtMjAxMjA2MDUtMTU0My5qcGc.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAzNjQtMjAxMjA2MDUtMTU0NC5qcGc.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAzNjUtMjAxMjA2MDUtMTU0NC5qcGc.jpg

Have no clue what this one is ? Any ideas?

Now this one I do know 100% what it is. This is for sure 100% a Klemm pipe IT was confirmed by harry. This is the handmade pipe. That was later made by powerpro. The one 03 orange shee posted is not a Klemm.

http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAzNjYtMjAxMjA2MDUtMTU0NS5qcGc.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAzNjctMjAxMjA2MDUtMTU0NS5qcGc.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAzNjgtMjAxMjA2MDUtMTU0NS5qcGc.jpg
http://i190.photobucket.com/albums/z119/Xowner350x/utf-8BSU1HMDAzNjktMjAxMjA2MDUtMTU0Ni5qcGc.jpg

Thanks guys!

[mike from long island]

Can you help me id some of these?


131912 DG or Phase 5 ? No Stamp

131913 DG? or Phase 5? No Stamp



They all have open hooks. Why did DG supposedly stop putting stamp on their pipe?
Thanks

I think it is a Phase Five.I just picked this one up.

[Jcormode]

Thanks Xowner and Raffa for making me do this.
This thread is intended to eliminate some of the confusion between which pipes are which. Pipe pics I am missing are Sand Scorcher, Factory Five, Answer, and FMF. If you have one of these pipes please post a pic.

DG (Ronnie wouldnt approve if I left it out)
http://www.dgperf.com/images/bikes/01-4009LG.jpg

Difference between DG and Phase 5 http://www.3wheelerworld.com/showthread.php?93116-What-the-hell-Tri-z-pipe-did-I-just-buy

Phase 5
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/262282_216868885023330_100001006604640_606828_2456 160_n.jpg

Cobra/Factory Tri (Confirmed by Brett Driscoll)
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/267933_216904251686460_100001006604640_606882_7061 599_n.jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/271026_216904275019791_100001006604640_606883_5662 715_n.jpg

Coffman or PK. If anyone knows exactly which it is please enlighten us
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/282147_216868638356688_100001006604640_606823_6133 286_n.jpg

CRF
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/282690_216868665023352_100001006604640_606824_1326 441_n.jpg

Jemco (Thanks to ZmPolarisTech)
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/262001_216868728356679_100001006604640_606825_5529 491_n.jpg

Klemm (Thanks to 03OrangeShee)
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/282132_216868775023341_100001006604640_606826_4606 152_n.jpg

LRD Non Adjustable (Thanks to Billy)
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/281475_216868825023336_100001006604640_606827_5414 264_n.jpg

LRD (Thanks to Mike From Long Island)
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/270632_217374468306105_100001006604640_608256_7794 075_n.jpg

Bassani
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/282209_216831448360407_100001006604640_606773_3895 295_n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/269735_216823431694542_100001006604640_606768_6826 44_n.jpg

Bills Pipe (Thanks to JEB)
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/264905_216890255021193_100001006604640_606869_4579 89_n.jpg

Unknown Pipes If you know the make please speak up

(Xowner)
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/268867_1896591100546_1414650207_31702828_4922723_n .jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/284744_216907581686127_100001006604640_606886_6227 783_n.jpg



cant see photos???

[RamsesRibb]

Can anyone determine what make is this pipe? 157223

[Tri-ZNate]

I dont know what happened to the pics, I'll work on it this weekend

[slaughter]

pic still aren't working
but do you guys know what this is, the guy said it was a klemm research but there are no markings or stamps
158897158898158899

[techguy]

I would also like to know RamsesRibb, I have one just like it.

[3 Wheel Drive]

Ok I picked up this drag pipe from LonesomeTriZ just recently & he was not sure who the maker is. The spark arrestor is stamped: Skyway - Cobra Spark Arrestor, US PAT No3863733 Model 300 Approved U.S. Forest Service. It has a Sparky Cobra Sticker on it too.

I dont know anything about drag pipes... Any info on this pipe is appreciated. I do have a few questions: How do these pipes mount on the foot peg bracket? Im guessing I need to find a large wrap around spring?

Whats up with the tail end being tucked under the rotor? I was told to have it cut and rewelded outwards. If I did that, it may be in the way of the wheel. Im thinking I'd need to run this with an extended swinger to avoid this?

A few dry fit snaps:

[pcs]

looks like a home made pipe? drag pipes are normally made for competition use so welding a spark arrestor to a drag pipe beats me.the front section pieces look like they came from a stock pipe just cut and re routed. having the muffler come back under the seat is also weird??? just asking to get is smashed unless you ran a strut instead of a rear shock or like you said, a really long swing arm look at the links for pics of drag pipes.

http://www.3wheelerworld.com/showthread.php/100353-Where-to-get-drag-pipes-for-my-atc-250r
http://www.ebay.com/itm/SHEARER-CUSTOM-PIPES-ATC-250R-DRAG-PIPE-WITH-SILENCER-RAW-/120867877041

[3 Wheel Drive]

160252160253160254

The Spark Arrestor is mounted with a hose clamp. I have some more questions.... If it is homemade and If I do use this pipe will it ruin my top end?

I'd like to cut the elbow off the pipe and have it rewelded straight like other drap pipes. It all fits together very well, i need to get some springs for it. How is this supposed to be fastened to the footpeg? Im thinking about wrapping a spring around the bulk of the pipe and strapping it to the peg mount.

It only cost me 100 bux!

[pcs]

the piece that is welded to the silencer where the sparky mounts looks like it was weld at a different point in the pipes life. $100 is a low price too! just bc its home made doesnt mean it wont work. try it and find out for yourself how it works.
pics of mounts. make your set up has some sort of rubber mount to control the vibrations.
http://www.yfzcentral.com/forum/86-yfzr-x-powertrain/115555-nmotion-drag-pipe-2.html

[6spdls1z28]

What happened to this thread I wanted to see what a bills pipe looked like

[C_latrace85]

Me too. I wish I could see all the pictures. I need to id 3 pipes