PDA

View Full Version : Need help identifying these wheels


Tippmann98
07-10-2011, 01:04 PM
They came off my 1984 200x so they have the 4x110 bolt pattern but what is the other bolt pattern to? I measured it and it seems to be 132mm. They say Dico on them and are 8" wheels. I'd like to know the name and what else they fit so when I sell them I can advertise it that way.
brd812
07-10-2011, 02:38 PM
I think some of the older honda used a 4 x 130 I think. Thats my guess. 1st generation ITP wheel, before there was a ITP. I'm not 100 percent but those may bolt up to some 200 and 185's. A diehard honda guy can tell you for sure.
Thorpe
07-10-2011, 02:40 PM
Looks like an aftermarket uni-lug wheel... Made to fit honda or yamaha... (imo)
4cylinders
07-10-2011, 09:16 PM
hey, make a cardboard templet from the wheel.
then get a good measurement from that.
Dirtcrasher
07-10-2011, 09:42 PM
Well, it says "DICO" so I guess thats who made them and they have 2 bolt patterns.....
Tippmann98
07-10-2011, 09:50 PM
Ya I'm trying to figure out the other bolt pattern tho. I used cardboard to get my measurements and 132 was what I got. I'll try again tomorrow and maybe I'll get a more common number.
Thorpe
07-11-2011, 12:12 AM
Well, it says "DICO" so I guess thats who made them and they have 2 bolt patterns.....

My SX had a "Dico" front tire....
dcreel
07-11-2011, 12:32 AM
I've been inside Dico back in the 80's. My mom bought me a set of 8" wheels and tires for my birthday. They didn't have polished aluminum wheels for the Tecate and being all of 15 I couldn't and wouldn't wait so I got gold anodized 8" wheels, they didn't match and still don't. Dico eventually turned into Dycorp and then closed it's doors. I think that they were loosely related to the Dick Cepek company.