My auto-x is up and running!

[atc350xer]

Well, the 200s motor that is supposed to be in it needs rebuilt badly, so for now, I borrowed the 185s's motor. What a fun little machine!

[davidt5777]

nice trike

[RapidRick]

Looks good, good for you!

[JustEnough]

What did you use for the brake pedal?

[RapidRick]

From the pic it looks like a modded 350X. I used the same lever.

[atc350xer]

From the pic it looks like a modded 350X. I used the same lever.

Correct. As far as modding goes, I just bent it a little... lol

[RapidRick]

Do you have a different stator to run the 350X head lights? Have you tried them yet?

[350XJEDI]

looks good ,

[atc350xer]

Do you have a different stator to run the 350X head lights? Have you tried them yet?

No I don't... I was going to ask someone here what stator I would need to run the 350x lights with a 185s/200s motor. Right now, it's a daytime only machine :lol:

[Bustos82]

That is awesome....

[RapidRick]

The 185/200 will produce about 50W at 5000 rpm (from the manual) so you'll probably need an aftermarket piece which will produce more than that to run the 350X setup. I've got the same setup on a 200X and it's no where enough. I'm thinking about rewinding a stock stator myself, basically the more winds the more power, however there is a limit to the space provided for mounting purposes. I have to finish an autoX build and put a 350X build together before I start on something else. I need about another 2 weeks, then I can figure this one out.

Another thought is the 185/200 uses the light bulb as a voltage regulator and the 350X has a voltage regulator.

And this just came to me... one of my 200x has a voltage regulator wired in to what looks like a stock headlight. I'll have to check this out also.

Here's some reading for you:

http://www.3wheelerworld.com/showthread.php?64904-250R-headlight-on-a-200X&highlight=200x%20250r%20headlight

http://www.3wheelerworld.com/showthread.php?77952-350x-headlight-on-a-85-200x

[atc350xer]

Thanks RapidRick! I have some reading to do!