Stator question

[tumbleweed]

hi i just bought a new after market stator from ebay
when i got it in the mail it looks abit different than the one i had originally..
My trike is a 110cc honda 83 i do believe,,

anyways im kinda puzzled on where the wire should be soldered on because this new stator has a metal tab in the center of the windings..

Anyone here know where i should solder the wire on the new after market stator?

http://i.ebayimg.com/08/!BcU7e0!!2k~$(KGrHqMH-C8Equz5C7kPBK0!c4v1v!~~_35.JPG

the picture above is the stator

[3wheelrider]

That metal tab in the middle is where you solder your wire... Dont know why they make them different that way.
I have no faith in those aftermarket stators. They just dont last very long.

[tumbleweed]

ya i just finally tried the middle tab like you said and it works for how long i dont know..:)
Had to clip it down abit it was sticking up to long..that tab would rub in the flywheel..
Anyways thanks for your help.. i thought it was the wrong stator at first by the look of it..