MonkOFox
05-26-2011, 11:56 PM
I was trying to get to the front brakes to check them out and most likely replace them, but I couldn't for the life of me get the axle to un-screw from the hub.
I tried an impact, wrench with a cheater bar and no luck.
Also tried heating up the hub and tapping it with a hammer to maybe jar it loose for the torque, but that didn't do the trick either.
What else can I try? My buddy said the aluminum most likely ceased up (probably hasn't been removed ever).
Thanks,
Justin
I tried an impact, wrench with a cheater bar and no luck.
Also tried heating up the hub and tapping it with a hammer to maybe jar it loose for the torque, but that didn't do the trick either.
What else can I try? My buddy said the aluminum most likely ceased up (probably hasn't been removed ever).
Thanks,
Justin