Any idea??

[kosbo77]

Anyone have any idea why my 200X cuts out when I'm hauling butt and hit some decent bumps? It doesn't do it on flat ground. It just kinda sputters a little then is just fine until I hit some more. Thanks.

[ridered86]

Most likely the floats in the carb...

[k00leo]

I had the same problem with the lt-160. My problem was a dirty carburetor and dirty gas tank.

Make sure you clean the inside of your gas tank, run an in-line fuel filter, replace the fuel lines, and clean/rebuild the carburetor.

[kosbo77]

Yeah, that's kinda what I thought. Was getting some other opinions. Thanks ridered.

[kosbo77]

Will do k00leo. Thanks.

[ridered86]

No prob. Had the same problem on a few of my rides. Usually a little cleaning/rebuild does the trick.

[shortline10]

Their is a small plastic splash guard that goes over the main jet in the carb . See if yours is missing or broken .

[jsmay]

mine did that too... run fine, hit a few whoops or jump and just about die. i pulled it apart and found a bunch of sediment in the carb. just get a can of gum-out.. now it runs like a scalded dog.

[4cylinders]

hey, if that doesn't do it, check for a bad ground. do not ground anything to the front end.

[ebecme01]

The little splash guard shortline is talking about is a pretty big deal for climbing and wheelies. Could be your problem, if you dont have one you should look into it either way.

[fabiodriven]

Their is a small plastic splash guard that goes over the main jet in the carb . See if yours is missing or broken .

x3. That would be the first thing to look for.