Look at the new bike ;) **pics added**

[three_wheelin45]

Here is what i justdrug home :o It needs some work but its a good little project. I mean it was only 60$ cant be a loss. But anyways heres pics and can someone help me identify where the vin Numbers are located. I think its a 185s or a 200s. Needs spark plug wire and a spark plug, gas tank, brakes, I have a brand new carb ;). And a few other misc things. Also the Butt head welded the rack to the frame and it broke off :mad: and the front rack is welded to the forks!!

121975121972121976121973121974121971

[three_wheelin45]

Bump?? Someone please help

[MudHogz]

i know on my 185s the vin is located on the steering colum

[three_wheelin45]

Okay thanks ima go look one more time

[Lil Earl]

looks like a good deal

[mi500]

yea right there on the head tube possibly covered in rust

[three_wheelin45]

JH3TB0100cc205390 is the vin on the frame

[MudHogz]

Decoding Results: 1982 ATC 185s

looks like thats what u got! :P

[three_wheelin45]

1982 185s

http://atcvin.webs.com/#vin=JH3TB0100CC205390

[three_wheelin45]

Lol well i was hopeing for a 200s but oh well :*( still a good deal :D

[MudHogz]

i was actually told the 185s was known for beating the 200's dont ask me how tho :S

[three_wheelin45]

Ima use it for hunting and trail riding and mudd so my x can quit takeing a beating :o Its gona be like a family workhorse prety much.

[Xpress]

:shiftyeyes:Trailpros:shiftyeyes:

[MudHogz]

haha dont feel bad about the welded rack, i just took off my wheels today to noticed my hubs are welded on!! also noticed the shifter is welded.. i thinking someone has a weldign fetish with my bike

[twitch101]

the 200 motor is really a bored out 185s is what i have heard so you can make your power if you want. i had a 185s frame with a 200es motor in it. was awesome in the mud and pretty quick too.

[hillbilly 200x]

for $60 you can't go wrong.

[three_wheelin45]

Nice i might have to look into big bore kits :o and i know i almost had a stroke when he said 60$, pulled it home with my 200x. Lol two teens goin down the road one on a race bike and the other on a utility bike getting pulled... You might be a redneck... :lol:

[hillbilly 200x]

Nice i might have to look into big bore kits :o and i know i almost had a stroke when he said 60$, pulled it home with my 200x. Lol two teens goin down the road one on a race bike and the other on a utility bike getting pulled... You might be a redneck... lmao that made me laught

[Kfx-xc-racer88]

Nice i might have to look into big bore kits :o and i know i almost had a stroke when he said 60$, pulled it home with my 200x. Lol two teens goin down the road one on a race bike and the other on a utility bike getting pulled... You might be a redneck... :lol:

trike towing a trike!!! lol

[Jason125m]

haha dont feel bad about the welded rack, i just took off my wheels today to noticed my hubs are welded on!! also noticed the shifter is welded.. i thinking someone has a weldign fetish with my bike

The shifter welded on will be fun for you if you have to take the left crankcase cover off!!!!!!!

[thestud25]

The shifter welded on will be fun for you if you have to take the left crankcase cover off!!!!!!!

If you are careful, you can typically grind the weld off without doing extensive damage to the shaft. I then take a small file and refile the splines. It has worked well for me several times. Very time consuming though.

[three_wheelin45]

This guy welded the exhaust togeather, i spent about an hour trying to get it off because i Pulled the motor out. Then relized this idiot weilded it togeather, So i had to get the grinder out and cut the exhaust in half up by the head, I might try to save the pipe or just buy a new one :o. Im going to build this bike right, I want to show my family my skills lol might take a year or so but when its done there going to be :drool:in all over it :lol: