do you think this would work with a honda axle

[bcredneck]

i found this on ebay and was thinking about buying it for the 185 but i dont know if i need the axle for it to http://cgi.ebay.ca/200cc-GIO-Beast-ATV-Swing-Arm-/250654998398?pt=Motors_ATV_Parts_Accessories&hash=item3a5c33bf7e

[bcredneck]

http://pictures.kyozou.com/pictures/_10/9556/9555124.jpg

[bcredneck]

they do sell this to http://cgi.ebay.ca/200cc-ATV-Rear-Axle-Complete-/250654605299?pt=Motors_ATV_Parts_Accessories&hash=item3a5c2dbff3
http://pictures.kyozou.com/pictures/_10/9581/9580345.jpg

[muthey]

it might be worth it to just buy the axle and swinger at the same time, would be a royal pain to have to get it later and someone else bought it, I think that will make a nice modification for a fully suspended 185s

[bcredneck]

the swingarm is around $50 and the axle is about $150 i was hoping is was a half ass honda copy like the rest of the chinesse stuff

[bcredneck]

one problem with the axle is it looks like its ment for a 420 chain but if its small i could drill holes and use it as a sprocet mount

[muthey]

and without having measurements it's just to hard to say guess you could always ask the company for bolt distances and measure yours on your 185s to see if you could do a direct bolt up