PDA

View Full Version : Can anyone I.D. this brake setup?


atc350xer
03-30-2011, 02:25 PM
This is what's on the front of my '78 ATC90 Frankentrike. I need to find out what model it is from so I can find a return spring for the brakes... sticky front brakes are bad!
atc350xer
03-31-2011, 01:36 AM
Nobody? I figured it was an early 80's 185/200 or something, but I've never seen one just like it before... I need that spring!
atc350xer
03-31-2011, 04:29 PM
Bump. Anyone?
atc007
03-31-2011, 04:57 PM
Is the splined shaft clean and free? Usually need taken apart,shined,greased and reassembled.
atc350xer
03-31-2011, 05:16 PM
It works fine. I need an ID so I can find the correct return spring.
Texaskev
04-01-2011, 09:24 AM
To me it looks like an 80/81 185/200 front brake. The bolt tells it......in 82 they changed the front fork and brake plate mounting. I have an 81 that had bent forks, changed to 82 forks and had to change brake plate over as well. Look at the brochures on the old site and see if the pics show the front brake............ Hope this helps.
bcredneck
04-01-2011, 09:28 AM
its from a 200 i got one just like it in my yard
oscarmayer
04-01-2011, 09:34 AM
its from a 200 i got one just like it in my yard

:lol: in the yard! that cracks me up! I can picture a pile of trikes lying there! hehehehehe
bcredneck
04-01-2011, 09:40 AM
i dont have that many trikes its mostly dirt bikes in my yard
atc350xer
04-01-2011, 11:02 AM
To me it looks like an 80/81 185/200 front brake. The bolt tells it......in 82 they changed the front fork and brake plate mounting. I have an 81 that had bent forks, changed to 82 forks and had to change brake plate over as well. Look at the brochures on the old site and see if the pics show the front brake............ Hope this helps.

Thank you! From the pics I saw, it looks like an '81 185s... now I need to find one for sale somewhere...