PDA

View Full Version : need heip with auto x



jeff350x
03-28-2011, 09:26 PM
i put together a auto x i rebuild the motor and new carb wont start its got fire and fuel i am sure the timing is correct it any advice thanks

oscarmayer
03-28-2011, 09:46 PM
check the carb. coudl be pluged or idle jet bad. try tapping the throttle while turnign it over.

jeff350x
03-28-2011, 10:03 PM
i will thanks it acts like there is no fuel getting to the plug but there is fuel in the bowl

oscarmayer
03-28-2011, 11:46 PM
try this, take the carb off and spray some carb cleaner down it and imedeadly pull the starter rope. if it starts to sputter, you got carb issues, if it does nothing, you got something else.

200XMichigan
03-29-2011, 12:05 AM
Or pour a cap full of gas in the spark plug hole. Sometimes after a rebuild they like to be primed. Otherwise timing could be 180 degrees off.

jeff350x
03-29-2011, 10:12 PM
ok thanks guys i will try that my next day off thanks again