Need help with Keihin Carb ID

[RapidRick]

Found a Keihin PD DGA6BHF Carb in a box this afternoon. Can anyone tell me what it might have come off of. Darned if I know where it came from.

Appears to be an approx 27mm dia.

[tri again]

I know I had a heck of a time cross referencing
Keihin carbs.

Prob 20+ websites incl Keihin itself and got nowhere.

Mine was from an 85 sx so maybe b/c it was old and discontinued.

Engine manufacturers pick carbs off a list and change them frequently
so it may be hard to backtrack too.

I wonder how you'd go about figuring out what it will fit?
Get lucky and hope someone has one on something?

I know I put a motorcycle carb on my 1947 j deere tractor
for one mowing season.

Just kinda matched up the intake diameter and grabbed one out of the box.
but I'm sure there's a right way to match them up.

[shortline10]

I have seen many Keihin carbs were the DG in the part # was actually supplied by DG performance products as an aftermarket carb . Got a pic ?




Found a Keihin PD DGA6BHF Carb in a box this afternoon. Can anyone tell me what it might have come off of. Darned if I know where it came from.

Appears to be an approx 27mm dia.

[RapidRick]

Looks identical to any of the 200x 185s carbs except it's 2-3mm larger. You could be right about the DG part, just branding I suppose.

120795120796

[250Eddie]

looks just like a 200x 200s 185s carb to me just the drain is out the back and not down the center.

[RapidRick]

Drain is out the back. I'm just trying to figure what it came off of. The thing is jetted alittle rich for a 200cc motor but, and a tad larger but should probably work fine with a little tinkering, don't you think???