PDA

View Full Version : hondaline 300 cc piston help


250r kid
03-07-2011, 09:20 PM
got my top end apart and the piston is toast does anybody know what size and were to get one
Rollingmenace
03-07-2011, 10:20 PM
Well man you have a dilema there.. These pistons are no longer available.. But you have a few options here #1 find a nos one on ebay #2 check over at air foolers dot com and see if some of those guys have any #3 you can run the trx 330 piston but that requires sending cylinder out to get a little deck heigh trimmed at a machine shop there are several peple who offer this you could check ebay or I recomend denny at flowtek he does good work and resonable
Daddio
03-08-2011, 12:27 AM
Well man you have a dilema there.. These pistons are no longer available.. But you have a few options here #1 find a nos one on ebay #2 check over at air foolers dot com and see if some of those guys have any #3 you can run the trx 330 piston but that requires sending cylinder out to get a little deck heigh trimmed at a machine shop there are several peple who offer this you could check ebay or I recomend denny at flowtek he does good work and resonable

I would have to agree with everything he said. #3 may be the best solution. Denny does good work and you can buy the trx 330 pistons all day long. I know a few guys that still have the stock pistons but they probably won't sell them and if they did it would probably be cheaper to buy a 330 piston and send your cylinder to Denny.
petesatc
03-08-2011, 05:25 AM
i have nos pistons and rings PM me or email through the site below....
stroberts22
03-08-2011, 07:11 PM
I haven't done it yet but these guys said they can have wossner build a custom piston if you have anything left of your old piston for them to measure.http://wossneronline.com/ If you don't go this route I would be interested in buying your old piston where I can send it to them to have some made to try it out. I also have had a 330 mod done on a 300kit that Flotek done and it runs awesome. I would go this way again but I got a selvy ported 300 cylinder that I want to see how it compares to the Flotek one.
bonkveinhead
03-09-2011, 01:49 AM
$148 on ebay, discountcycleparts446 is the sellers name, go to there store and look under the big bore section.
Daddio
03-09-2011, 02:09 AM
$148 on ebay, discountcycleparts446 is the sellers name, go to there store and look under the big bore section.

This is actually a 330 piston that they are selling. The seller offers a mod to make the piston work.