PDA

View Full Version : KLT200/250 Service Data



MonroeMike
03-06-2011, 06:53 AM
1 http://farm6.static.flickr.com/5173/5501579915_4cb049695d_b.jpg
2 http://farm6.static.flickr.com/5299/5502173002_bab6b67597_b.jpg
3 http://farm6.static.flickr.com/5215/5501580047_83c4e7e3e4_b.jpg
4 http://farm6.static.flickr.com/5256/5501580083_467845f399_b.jpg
5 http://farm6.static.flickr.com/5217/5501580147_9440f35091_b.jpg
6 http://farm6.static.flickr.com/5171/5501580297_d29ed38035_b.jpg
7 http://farm6.static.flickr.com/5098/5502173434_69ff74d591_b.jpg
8 http://farm6.static.flickr.com/5179/5501580487_6b9be1824e_b.jpg
9 http://farm6.static.flickr.com/5057/5501580561_2bb506e50f_b.jpg
10 http://farm6.static.flickr.com/5051/5502173728_9a475c1388_b.jpg
11 http://farm6.static.flickr.com/5295/5502173866_5186f93d17_b.jpg
12 http://farm6.static.flickr.com/5211/5501580917_320c86035f_b.jpg
13 http://farm6.static.flickr.com/5018/5501581049_aa79c98b3e_b.jpg
14 http://farm6.static.flickr.com/5091/5501581209_a52a88b9a9_b.jpg
15 http://farm6.static.flickr.com/5292/5501581351_3bb77bd0f3_b.jpg

MonroeMike
03-06-2011, 06:54 AM
16 http://farm6.static.flickr.com/5095/5502174568_3579c1c284_b.jpg
17 http://farm6.static.flickr.com/5291/5501581619_58d021c8e2_b.jpg
18 http://farm6.static.flickr.com/5138/5502174854_015f1dccc6_b.jpg
19 http://farm6.static.flickr.com/5136/5501581785_05f9fb31b5_b.jpg

wyatt
04-15-2011, 09:27 AM
thanks there is some good stuff there but I really need the service manual for complete tear down and rebuild I will post it and see if anyone has a link to down load a free manual wyatt

RottN
05-07-2011, 11:11 AM
LOTS of great info! Thanks much! Too bad I have dial-up so 1.5 hrs later it still hasen't all loaded lol

Super350
10-03-2013, 11:22 AM
could use a full manual or specs on how to check the electronics. thanks

KawiKLT
04-10-2016, 12:01 PM
Good afternoon, i am looking for a complet break down for my 85 kawasaki klt 250 c3. I need to see what lines go in and come out of the fuel pump. And qould anyone know how to test the pump to see if it works or not?