atc 90-110 roller bearing cam help

[swifty]

just got 2 aftermarket cams 90-110 style, one is big als and the other?? anyway they take roller bearings on the far right end and i dont have them, does anybody have some, i know we had the dimensions years ago and just ordered universal roller bearings somewhere for these cams as the stock bearings included were crappy to start with, so let me know if anybody has some extras. thanks

[shortline10]

I dont have extra bearings but I can get you the bearing # so you order new ones from your local shop . If you dont have any bearing shops local LMK I can check out mine .




just got 2 aftermarket cams 90-110 style, one is big als and the other?? anyway they take roller bearings on the far right end and i dont have them, does anybody have some, i know we had the dimensions years ago and just ordered universal roller bearings somewhere for these cams as the stock bearings included were crappy to start with, so let me know if anybody has some extras. thanks

[swifty]

that would be great the local bearing shop closed years ago thats where i had the cam& head mic'd for the bearing size i bought long ago if you could get me a part # or size to work with i could maybe get a few online, thanks shortline

[shortline10]

Here is a pic of the BAPP roller bearing . # looks like a 1212 Hope this helps . If you have no luck LMK and i'll stop by my bearing supplier and see if he has them .

[shortline10]

Found a few on ebay just doing a quick search .


http://cgi.ebay.com/J1212-Needle-Roller-Bearing-3-4-x-1-x-3-4-inch-BA1212-/130460035782?pt=LH_DefaultDomain_0&hash=item1e60062ac6

http://cgi.ebay.com/Torrington-Roller-Bearing-IR1212-/250631230615?pt=LH_DefaultDomain_0&hash=item3a5ac91497

[Shorty]

Could you use one of these with a stock 90 cam?



(Just wondering)

[swifty]

thanks shortlilne10 ill order a few!

[swifty]

heres a pic of a stock cam and mine side by side does anybody have a cam with 1 roller bearing around they could take the part # off the bearing for me? the bearing i need would roughly measure 12mm inside 18mm outside and 14mm wide , thanks justin:lock:

[swifty]

sortline found me the correct one! apparently the letters in front of the 1212 part # make it diffrent sizes theres like 5 diffrent sized 1212 bearings my size was 12x18x12mm