atc 110

[H95Shooter]

so to adjust the timing chain on my 110 i pull the black cover on the opisite side of the pull starter and turn the bolt right :wondering i dont want to break my 85 110 :lol:

[H95Shooter]

i needed a bump

[MonroeMike]

The 85 110 has a automatic cam chain tensioner, there is no adjustment.

[H95Shooter]

oh beacuse on one of my youtube videos some guy said i need to tighten it so might i need a new chain? and if some one gave me the online manuel that would be great

[swifty]

your 110 should not have a rubber plug next to the recoil... 185-200's do???? 110's have a adjuster next to the shifter shaft, its a 12mm nut with a flat head screw in the middle loosen the nut 1 turn then loosen the screw 3/4 turn its an automatic spring loaded adjust once the set screw is loosend it will take up the slack , then just tighten the screw and nut and your done

[MonroeMike]

From the service data.

There's a manual here also, read page six.
http://72.52.143.80/~trikes/atc70-125_1985_and_earlier_servicemanual.pdf

[H95Shooter]

your 110 should not have a rubber plug next to the recoil... 185-200's do???? 110's have a adjuster next to the shifter shaft, its a 12mm nut with a flat head screw in the middle loosen the nut 1 turn then loosen the screw 3/4 turn its an automatic spring loaded adjust once the set screw is loosend it will take up the slack , then just tighten the screw and nut and your done
i said on the oppisate side of the pull starter sorry for the bad information

[H95Shooter]

haha i feel dumb i clicked on the honda mauals and there was no 85 it was 79-82 WTF:mad: i mean i want/need a 85 manual:lol:

[H95Shooter]

yes mike but i want the entire manual ^^^ sorry did u edit your post to do that or it was my computer not showing it

[whipit]

opposite side from the pull starter is the clutch cover. as you may guess, the locknut and screw found there are the clutch adjustment, not cam chain