PDA

View Full Version : 84 tecate bought



jrwebb8324
01-30-2011, 10:27 PM
Bought this off CL for 550. Runs good, needs lots of tlc though. This is my first tecate, heard lots about them but never rode or had one. Any info would be helpful. Thanks

dcreel
01-30-2011, 10:55 PM
Awesome.. Join the Tecate group in the group section. It is full of info on Tecate's. What questions do you have? Check the shift lever to make sure it's tight. Check for cracks in the framerails under the seat on either side. The stators tend to quit, the magnets on the flywheels tend to delaminate and take out the stators.

hang&rattle
01-31-2011, 12:28 AM
Good find and you got a good deal jrwebb. Tecate's are a blast, great 3-wheelers and fun! And as dcreel said, hook up with the Tecate group, great, close-knit group of guys. Glad your here partner.

Jeepermc
01-31-2011, 12:51 AM
Great buy!....looks better than mine did when I started.. You must join the tecate group here... Lots of new stuff going on to get parts reproduced or keep em runnin.

matt86200x
01-31-2011, 02:39 AM
Bought this off CL for 550. Runs good, needs lots of tlc though. This is my first tecate, heard lots about them but never rode or had one. Any info would be helpful. Thanks


So you picked up a tecate and a 350x in the same day?? Wow i would kill for a deal like that around here

Great score!!

jrwebb8324
01-31-2011, 02:56 AM
I picked up the 350x and the tecate a few days apart. Got my taxes back and thought I would buy myself a early b-day gift.:D

TommyBoy1971
01-31-2011, 03:21 AM
bet the old lady liked that idea....not! LOL, congrats

BWard
01-31-2011, 10:19 PM
Nice buy there, red and a low profile rear fender, sweet!!

nd4speed
02-01-2011, 03:31 PM
It dont look that bad at all......I'd ride it!

Water pump seal is not the greatest. Poor rear shock.
Frame cracks, weak foot pegs, loose hardware everywhere.....

http://www.3wheelerworld.com/showthread.php?94809-Kxt250-Tecate-3-What-Parts-Fit-Swap-Interchange

Xpress
02-01-2011, 04:37 PM
^Funny you mention the broken footpeg... :rolleyes:

Go over it with a set of sockets and make sure everything is tight.

jrwebb8324
02-01-2011, 07:17 PM
ok thanks for the ideas