cr80 motor in atc70 chassis

[shortbus]

Anyone ever do this swap, or have any input on this, iam going to be picking up a 70 and have a cr80 motor in the garage.

[KASEY]

I HAVE ONE SETTING ON THE BENCH TOO... was going to do the swap.. changed my mind to much with the rads and pipe .. it can be done i have seen a couple,,

[atc500x]

Why not using and old cr80 free air? 1980 cr80 motor is very compact.I was think about the same thing yesterday,I have a complete motor/carb setup on the shelf with a new piston and bearing in it

[shortbus]

Its a 1999 cr80 motor, iam picking up the 70 today, i will see how everything looks when i get it home, if that one member fit a 250r in a 70 it can do be done, and i bet it will rip!

[Tri-ZNate]

if that one member fit a 250r in a 70 it can do be done

I really hope you dont have to go as far as he did to fit it. Good luck, it'll definatly be a cool bike

[shortbus]

I really hope you dont have to go as far as he did to fit it. Good luck, it'll definatly be a cool bike

Yea i just looked at it tonight, the pipe and radiator are going to be a big problem, im really not looking to hack this bike up, so i will most likely just end up putting a 88cc kit in it with a race head and be done.