1984 Honda ATC Bigred Big Red 200es plow with manual lift (Homemade)

[npiontek17]

This is a plow mount and lift that I made for my 1984 Honda Bigred 200es.

The plow frame is made from stainless steel. I have it mounted to a cross bar that is mounted to the nerf bar and skidplate assy. under the motor. I made the cross bar from tubing that I welded some tapped out round stock in side of tube. The lift mechanism i made from 1" tubing with 3/4 round stock through the center as the piviot. I mounted the plow to frame with 1/2" bolts for easy storage and if I bought a bigger plow. I also made a lock for the plow when its in the up position, no pic of that though.

I have pushed the snow in the yard that was taller than the blade and no wheel slippage. I have the tire pressure at 4psi. The thing does better than the neighbors atv. No chains or wheight on the 3 wheeler.

Here are some pictures:
http://www.3wheelerworld.com/album.php?albumid=707&attachmentid=114730
http://www.3wheelerworld.com/album.php?albumid=707&attachmentid=114731
http://www.3wheelerworld.com/album.php?albumid=707&attachmentid=114732
http://www.3wheelerworld.com/album.php?albumid=707&attachmentid=114733
http://www.3wheelerworld.com/album.php?albumid=707&attachmentid=114734

[Chazz of Blades]

Sweet, thats pretty nice.

[MonroeMike]

Well done, looks good.

[mtsnieg]

Looks nicely done. Makes me wanna get started on one myself. I really need one for ice track plowin.