View Full Version : 10in rim
Nightmare
01-20-2011, 07:51 PM
Can I get a ten inch from wheel for my 86 200x. I want to run a 22inch tire in my preference.
Jason125m
01-20-2011, 07:57 PM
you can, but you can also get a 12" rim from itp. Not sure where to get the 10 inch from.
JohnR.
01-20-2011, 09:53 PM
I believe an 86 200X will take the same wheel as an 85-86 R. If so, look at the post by "riverrat" on how to get a 10" wheel without breaking the bank.
John
Chazz of Blades
01-21-2011, 03:27 AM
I have two aluminum 10 inch wheels that will bolt directly on to the stock hubs on a second gen 200x, that need a new home. Little dirty, little bit of rash on them, but other than that perfect.
JohnR.
01-21-2011, 10:57 AM
I was assuming that you wanted this 10 inch for the front, if not then you can just get a set of aftermarket 10" rears for a 250R, 300EX, 400EX, 450R, and a ton of other machines that have the same bolt pattern.
John
Nightmare
01-21-2011, 07:26 PM
Ya I know for the rear it's simple... I should have specified.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.