Converting 110cc Honda to a 125cc Loncin

[branch]

Hi everyone: This engine is coming without wires, carb, intake manifold, cdi, ect. Bare engine. What, will fit from the 110 setup? Is there anyone out there who has experience with this that can clue me in on what I'll need?:p

[CrkdLtr]

Check DrATV's site. He has a lot of information concerning lifan swaps to honda cycles. Loncin/Lifan are both chinese made honda engines so you should get comparable information.

http://dratv.com/newreen.html

[Vealmonkey]

Nothing from the honda 110 engine will fit the 125, totally different engine block sizes. Those engines are based off the z50/atc70 sized engines.

[86trizinger]

I put a 140cc in my 90.. It was a snap.

I have some parts I will sell cheap..I have a box full of Loncin engine parts. I know I have a manifold or 2. When you get the engine take a picture of the wires coming from the stator, They have different wiring connectors and harnesses.

You will also need adapter brackets for the engine. They are only $15 or $20.
Plus need to modify the stock pegs. Exhaust I used is just a standard pit bike exhaust modified to fit.