Hub ?'s for 185s

[79fordblake]

I picked up two wheels and the hubs that go with them that a buddy had. He has no idea what they came off of, I got them for free. I am really hoping the hubs will fit my 185s so I can get rid of the split rims and so I can have 4 lug wheels and hubs. Anybody know how I can tell by looking at them?
http://i232.photobucket.com/albums/ee238/deeremana/Photo711.jpg
http://i232.photobucket.com/albums/ee238/deeremana/Photo713.jpg

[rdlsz24]

Those look like 1st gen 200x hubs. They should bolt onto your 185s axle. You can count the splines if you are unable to physically try it.

Rob

[79fordblake]

Just noticed today that the wheels say Yamaha on them. Will they still work you think? The hubs fit the wheels so I guess the hubs are Yamaha too?

[willrideanythin]

Look like blaster, What sizer are the rims?

[fmnrd]

tri z maybe?

[79fordblake]

Well whatever they are they fit my 185s axle I tried them today to make sure. Now I am in the process of sanding them down and painting them. Ill have to remember from now on if I get another set of wheels they have to be the yamaha bolt pattern.

I do need a big washer to take up the slack though from the hub being a bit narrower.

[willrideanythin]

I have some blaster wheels with trike style rubber on them. Whats the bolt pattern?

[79fordblake]

http://i232.photobucket.com/albums/ee238/deeremana/Photo723.jpg
http://i232.photobucket.com/albums/ee238/deeremana/Photo724.jpg
I painted the wheels silver metallic and did the hubs in bedliner. The bolt pattern is 4/100.

I am going to want to get rid of or trade my stock 81 185s wheels and hubs after I get my tires changed over.

[79fordblake]

Here are the wheels and hubs together. Two studs were missing on one hub so I bought some bushings and pressed them into the hub so a 3/8 bolt would fit snug. Then I went and bought two grade 8 bolts. I wish I had did this to all of them the 3/8 grade 8 bolt looks good in there.
http://i232.photobucket.com/albums/ee238/deeremana/SANY0012.jpg

Anybody know how much I can sell my stock 3 lug two-piece wheels for? They are in good condition, no bends. Hubs are in good condition also.

[poopstick]

I got a 185s for 125 bucks that runs good. It came without the rear rims so i havnt gotten to ride it yet. It has the three lug pattern rim.

I found a 185s in the junk yard pile that had the three bolt pattern. The guy said i could take the rims off for free, but he wouldnt let me have the whole thing. I went home and got a wrench and came back 45 minutes later. The other worker burried them in scrap steel while i was gone.:rolleyes:

sure could use them rims if you got em