honda 350x 1986

[350xnumber1]

hey guys im new to the site i just bought a 1986 honda 350x in pieces the motor is all together but the frame is stripped and the whole rearend is apart i someone help i want to rebuild it and put it together but i dont know where to start and i dont know how to put the rearend together.

[k00leo]

go here

http://72.52.143.80/~trikes/

and download the manual to the 350x, it will give you a good start

[350xnumber1]

do you think its worht sticking alot of money in? just asking i dont know much about threewheelers

[k00leo]

You may get a lot of different answers here, but since its a trike forum, the majority of people here will most likely say yes.

I have a 1986 350x and i love it, then again, it was in good shape when i bought it. You will not be disappointed with it. The best advice i could give you is to get it running, ride it, and then decide if you want to put more money into it.

How about some pictures?

good luck!

[350xnumber1]

uhm i will put some pics on here soon its not pretty but i will just try to get it together first and running then ill see thanks alot man.

[aldochina]

welcome!! good choice on the 350, by far the best 4-stroke trike out there. if the motor is good, and you just want something solid and dependable you wont have to put too much into it as long as your mechanically inclined. used parts are aplenty here and on ebay. Be warned though they can become a money pit quick if you want it to look SWEEEET!! post up some pics of what you got!

[350xnumber1]

hey man thanks uhm i kind of am but im not sure about all these bearings and seals and stuff and im sure im missing some bolts. how do i get some parts off of here do you have any i can buy from you?

[Big Mike]

There are parts abound on here for the 350x, but what I would do is start putting it together, and find out what parts you are missing. You might be suprised there is only a few bolts you are missing and you will be able to get those on here. I just bought by first 350x and I am learning about it all too. I would at least get the motor running and if it runs strong then finish doing everything else. I started with a strong runner that needed some work, and I am very happy with this machine. I love it.

[350xnumber1]

alright man thanks

[350xnumber1]

ok guys i put the rear end together and on the brake side there is suppose to be a space before the little clip that hold the whole axle together. i need that and the whole fork assembly in the front and i need the bearings and all the hardware that holds it together.

[CanadianThomas]

ok guys i put the rear end together and on the brake side there is suppose to be a space before the little clip that hold the whole axle together. i need that and the whole fork assembly in the front and i need the bearings and all the hardware that holds it together.

You should make a nice detailed list and repost it in the classified section of the site. You will find your parts fast around here.

[cattle-dog]

if rider quality frontend is what you want i have a complete front setup and will include a new bearlng kit for the stem. pm me if interested

[bcredneck]

i got a 85 350x they are defiantly worth fixing after you ride it you will probabley love it and if your weird and you dont you came to the right place to sell it

[350xnumber1]

anyone have a hub for a 350x the guy who i got this trike from welded one hub on now i need a hub does anyone got one layin g around. please help.

[aldochina]

you would prob have some luck posting in the classified section if your looking for parts.