Help!!!!!!!!!!!!!!

[atc200e]

I am in desperate need of an exhaust for my 83 big red 200. Have looked for a good aftermarket, bu no luck. If you know of a good site or you have one, let me know. Thanks in advance.

[Lord Letto 20]

i don't know of any places in the states but i do know that there is cobra exhaust available for the 83 big red, did you go to your nearest dealer and ask them about a exhaust?

[Kevin Hoettel]

make one! or buy one for a different similar size 4 stroke and mod it

[bcredneck]

go to fmf.com and if they dont have one for a 200x they will have one for a xr 200 its the same motor

[three_wheelin45]

go to fmf.com and if they dont have one for a 200x they will have one for a xr 200 its the same motor

He's talkeing about a 200es its no where near the same as the x or xr, the 200es is shaft driven. But im sure Cobra makes one for it.

[atc200e]

actually 200e

[three_wheelin45]

ahh trailprotrailprotrailprotrailpro... lmao so i feel like a newb! yea the 200e was chain driven. but still totaly different then the x and xr.

[Thorpe]

^^ Read the details... Its an 83... In 83 they were all chains... Newbs :rolleyes:

[bcredneck]

the top ends are the same the only differents is the tranny because they added a auto clutch a pull start a shaft drive if you dont belive me look at the shop manual

[CanadianThomas]

I have a stock one off of a 200x, with a pipe as well. If you feel like doing a bit of mods should work fine. PM me if you want. I'll make it cheaper than cheap!

[bcredneck]

200x 200m 200es 185s xr200 and the xr 185 where all desiged from a 100 street bike

[jamminjimmi]

I used an X headpipe because it was longer and larger diameter than the stocker, and I modified a twin cylinder riding mower muffler with a 2 3/8 id x 6" chain link fence pipe union that I welded to my mocked up muffler, and a 1 1/2 id x 1 3/8 od adapter from autozone that fit super tight on the head pipe so the two could slip apart if necessary. I also welded 2 tabs on my frame for the new can, super quiet and cost me about $8 for the pieces of pipe and a free muffler from your local lawnmower repair shop.
http://i492.photobucket.com/albums/rr287/jamminjimmi/big%20red/DSC00494.jpg
http://i492.photobucket.com/albums/rr287/jamminjimmi/big%20red/DSC00497.jpg
I got tired of looking for a good quiet replacement and the 200x pipe was 1/8 bigger id than the stocker.

[atc200e]

Thanks guys, but I dont have all the tools to do that stuff.

[atc200e]

bump....anyone know of a website or have one?

[Thorpe]

try posting in the want ads...

[atc200e]

Hey guys thanks for all the replys. I found a real nice DG on Monkeybutt for 138 bucks. Im ready to get this badboy!