Chazz of Blades
12-23-2010, 03:13 AM
So I picked up a yamaha 125 Tri-Moto not long ago for $150. The front tire needs replacing, the front fender is gone, the plastics need painting, and the seat cover has drawn up.
It's been sitting in a storage shed for 11 years, and before it was stored, fully rebuilt, bored .20 over, wiseco piston, 175 rear, the works. Had enough gas ran through and rode to make sure the build was good, and stored.
This thing cranked first pull, with nothing done to it, just poured some two cycle gas in (didnt know if the OI system was funtional at the time), and fired and cranked first pull. Everything on this is good, and the Oil injection system(was this stock???) is good.
After 11 years the read tires havent leaked down AT ALL, no flat spots, and no cracks/dry rot.
It's been sitting in a storage shed for 11 years, and before it was stored, fully rebuilt, bored .20 over, wiseco piston, 175 rear, the works. Had enough gas ran through and rode to make sure the build was good, and stored.
This thing cranked first pull, with nothing done to it, just poured some two cycle gas in (didnt know if the OI system was funtional at the time), and fired and cranked first pull. Everything on this is good, and the Oil injection system(was this stock???) is good.
After 11 years the read tires havent leaked down AT ALL, no flat spots, and no cracks/dry rot.