Front mastercylinder for a 1984 250R

[Toledo_Tommy]

I can't seem to find a decent front mastercylinder for my 84R (even on ebay) Is there any other makes/models/years front mastercylinder that will work for this. Someone told me a 85 200x will bolt right on but i want to make sure.
Thanks

[dcreel]

You should be able to use the front master cylinder off of just about anything with a front hydraulic disc brake. Dirt bike, quad, or 3 wheeler.

[Toledo_Tommy]

Any examples of models that will for sure work ?

[Dirtcrasher]

KX,CR 250,450,125R,250R - They all use the same brake fittings and are cheap and easy to find.

Go on EBAY and look at some.

[nickitzi]

Any honda master cylinder with a banjo bolt will work as long as it is for 7/8" bars try to find early 70's twins on ebay you can use either round or rectangle, only difference is you can see the fluid level on the plastic ones.

[dcreel]

Any honda master cylinder with a banjo bolt will work as long as it is for 7/8" bars try to find early 70's twins on ebay you can use either round or rectangle, only difference is you can see the fluid level on the plastic ones.

Honestly I would look for the newest, cleanest, for the least amount of money. I 2nd Dirtcrasher.. check CR, KX, YZ, and RM dirtbikes for the newest and cheapest you can get. I'm fairly sure that even bikes with 1.250" bars still have a 7/8" mount for the front master.

http://cgi.ebay.com/ebaymotors/Kawasaki-KX-125-Front-Brake-Master-Cylinder-KX125-KX250-_W0QQcmdZViewItemQQhashZitem230b6dcd03QQitemZ15051 5600643QQptZMotorcyclesQ5fPartsQ5fAccessories
http://cgi.ebay.com/ebaymotors/06-KX250F-KX-250F-front-master-cylinder-59-_W0QQcmdZViewItemQQhashZitem2eb11bb4d8QQitemZ20053 9878616QQptZMotorcyclesQ5fPartsQ5fAccessories

[Toledo_Tommy]

Ok, Thanks alot guys !

[fabiodriven]

I already told you that in your other thread.