PDA

View Full Version : (Firing Issues with 250 big red)



ham454
11-01-2010, 09:18 PM
(Issues with 250 big red)
I have a 250 big red that when it gets hot it stops firing.(sometimes) Does anyone have any ideas.. Thanks a bunch. :confused:

tri again
11-01-2010, 11:37 PM
Hi and welcome.

Make sure theres oil in it.

Then what I usually do is get a hairdryer, start the trike from cold, and then hit, say, the ignition coil with the airdryer and see if it dies with the extra external heat.

before the engine heats up to where it normally dies.

Could also be something as silly as a fuel tank vent not venting and just seems to take the same amount of time to fail as it does to heat up and fail.

Keep us posted.