200x electrical problems

[grafitti911]

ok I redid the topend set the timing right re installed the moter now no spark nothing need advice

[Yamaha_Rules69]

Do you have the spark pickup air gap set correctly, or in the correct position? (straight up) Have you looked at the wires, and tried a new plug? Unhook the kill switch? Check the manual, and see what it says to do or where to start in the troubleshooting secton for the no spark diagnostic tests. It will give you a few more ideas. Good luck!

[grafitti911]

has a new sparkplug installed I'm gonna re tear down n check things out on the inside cause I noticed there's no compression I think I screwed up the rings then go from there

[ustin666]

did you connect the ground ?