View Full Version : 1986 250es big red
edward mitchell
10-03-2010, 08:15 PM
i can not get my 250es big red to fire i thiught it might be the coil but it is not, it is not fireing took the plug out and grounded it to the frame and there is no spark, also took plug wire and stuck screwdriver in it and grounded it to the frame no spark. dose anyone know what the problem is or what i should check.. i cut the fuel on did everything i thought possible but there is no fire at the spark plug. i notice when i switch it on i have to wiggle the key to get the neutral light to come on.....any suggestions
Thorpe
10-03-2010, 08:29 PM
Turn your petcock on. (give us a few more details if you would...)
TheRealFatShady
10-03-2010, 09:11 PM
Check all wires, especially the on/off switch.
edward mitchell
10-03-2010, 09:24 PM
Turn your petcock on. (give us a few more details if you would...)
i want fire checked the coil it is fine can,t figure it out
edward mitchell
10-03-2010, 09:26 PM
Check all wires, especially the on/off switch.
i notice you have to wiggle the key to get the neutral light to come on could this be the reason the plug ain,t fireing ????
Thorpe
10-03-2010, 10:20 PM
Ohm out your stator
edward mitchell
10-04-2010, 12:12 AM
Ohm out your stator
ohm out your stator. explain not sure of what you are saying.
MonroeMike
10-04-2010, 12:54 AM
Check section 14 of the manual.
http://72.52.143.80/~trikes/Manuals/ATC%20manuals/atc250es-85-87servicemanual.pdf
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.