idle prbolems

[lunchbaux]

i have been trying for almost 8 hours to get my '85 atc 110 to idle correctly. I already read some other threads and found where the main jet idle screw should be set at and when its in the correct spot(according to the manual) it idles fine but boggs down when i hit the throttle and when i shift out of neutral it starts to go like its idleing to high for the clutch.

[Xpress]

Could be an air leak. Have you tried a new plug?

[muthey]

check and clean the secondary jet also, I would clean the carb an extra time and look for anything in the main jet and checking the float needle jet as well

[harryredtrike]

so many variables here.is everything stock?is the carb clean?jets,pilot jet?spark plug good,right one?

[lunchbaux]

havent tried a new plug yet (but it is good) ... and i have cleaned both jets and the float needle looks fine but im going to try a complete rebuild kit tomorrow., and yes it completely stock and i have cleaned the carb multiple times to make sure

[Thorpe]

Get a fresh plug as well... I can tell when my BR wants a fresh plug... It still runs, but not like its suppose to!

[harryredtrike]

does the #2 in the pic move up and down when you touch it,(not connected to the slide).

[lunchbaux]

no it doesnt. is it supposed to?

[harryredtrike]

no it doesnt. is it supposed to?

no,should move with the slide.

[lunchbaux]

ok thats nice to know

[harryredtrike]

what color is the electrode on your plug?

[lunchbaux]

black. im going to get a new plug today but i did get a carb rebuild kit and rebuilt the carb and it works better not but still boggs down a bit

[harryredtrike]

well your running rich on fuel,could be clogged air filter,wrong setting on the air mix screw,float set to high.or could be electrical,but dont focus on that yet.

[lunchbaux]

ok ill try adjusting the air screw and ya my air filter is a little dirty but not too bad i am going to replace it soon though